User Manual

OSMAC BaseOSMAC Base User Manual
Page 20
GROUP X PAGER NNGROUP X PAGER NN
assign pager numberassign pager number
Where X is the group number you wish to work on and NN is the pager number assigned to this group.
Important Note: when you wish to page this group, you will enter the pager number NN for it, not the
group number.
3. Use the DEL key to backspace over NN if you wish to change the pager number this group is referred to
by. If the pager number NN is already assigned to an active pager, the will not allow you to assign that
number to the group and the pager number will be erased. If you wish to use NN for a group number
instead of an individual pager, you must first de-activate the pager. Section 3.1 describes how to deactivate
a pager. Once the pager number for this group is set, press the F1 button. The following prompt will appear.
GROUP X = numericGROUP X = numeric
SELECT GROUP FUNCSELECT GROUP FUNC
4. Using the arrow keys, select the function (numeric, alpha or tone) for this pager group. Members of the
group may be of any type, but this selection will determine the prompt to the user when a page to this group
is initiated. Press F1 when your selection is made. The display will change to :
GROUP X MEMBER NNGROUP X MEMBER NN
ENTER MEMBER NUMBERENTER MEMBER NUMBER
5. X will be the group number you are currently working on, and NN will be a number corresponding to the
member number you wish to edit. The first group member you enter will be member 1. The second one
you enter will be member 2 and so on. The display always first shows the next member number you can
enter a new member as. Use the UP/DOWN arrows if you wish to scroll through the members, or press the
DEL key to edit the member number and manually enter the member number to edit. Press F1 key when
you are ready to edit/add the selected group member. The display will then show:
MEMBER NN = MEMBER NN =
ENTER PAGER NUMBERENTER PAGER NUMBER
6. Enter the number of the pager you wish to add to the group. For example if you wish to add pager number
123 to the group, then enter 1 2 3 and then press the F1 key. Use the DEL key to backspace over any entry
if you wish to edit it. Note that:
• To see the pagers in the database are members of this group, you can use the UP/DOWN arrow key to
scroll through the members of the group.
• To delete a member, at the MEMBER NN = MEMBER NN = prompt, use the DEL key to erase its number from the screen,
and press the F1 key.
7. To finish entering pagers to this group, press the - key.