User Manual

OSMAC BaseOSMAC Base User Manual
Page 22
5.5 Phone Autodial Memories
The OSMAC BaseOSMAC Base has 10 Phone Autodial Memories. These must be programmed prior to use by two-way-radio
users. To program the autodial memories:
1. Enter the number of the autodial memory to be examined. Alternatively press the arrow keys to cycle
through the memories. The first 20 characters of the autodial memory's phone number will be displayed.
Note that each phone number may be up to 27 characters in length.
2. To change the contents of the autodial memory, enter the new phone number using the number keys on the
keypad. The following keys have special functions:
Key Character Displayed Function
- _ Insert a pause in the dialing sequence
DEL {none} Delete the previous character
F1 {none} Save the phone number and exit the entry mode
F2 # DTMF # key
F3 * DTMF * key
F4 F Flash hook
3. Press F1 to save the phone number.
4. Repeat steps 1 through 3 as desired, then press the "-" key to exit to the main programming menu.