User's Manual

Vyyo Installation Guide
www.vyyo.com
Setting the WMTS IP Address – p. 103
14. Now enter the filename “regtree.rtr” in the “Version File” window, then
click the “Start Software Download” button. Recall that the regtree.rtr file
must be in the TFTP download directory as described in the first part of
this procedure. The message below is displayed after the download
command is sent to the WMTS – it does NOT indicate that the download
has occurred. To confirm the download you must observe the indicator
LEDs on the WMTS: they should be flashing with activity. You should
also monitor the TFTP application window (see next figure) to verify that
the download to the WMTS has occurred. When the file transfer is
complete, click the “System Restart” button. The WMTS will now reboot
and read the new RegTree.rtr file to configure itself.
Figure 7-10. WMTS Download of Regtree file
Very important
Do this last!
Messages are
displayed here