User's Manual

Vyyo Installation Guide
www.vyyo.com
Launching the Vyyo Configuration Tool – p. 130
D.2 Launching the Vyyo Configuration Tool from the
“Start” Menu
1. From the “Start” menu select and click on “Configure WMTS”
Figure D-2: Using the “Start” menu to launch the Vyyo Configuration Tool
35. You must now add the WMTS by selecting the “Insert” menu option then
choosing “WMTS” from the drop down menu
Figure D-3: Adding (Inserting) the WMTS
36. Insert the WMTS IP address and click “OK”
Figure D-4: Inserting the WMTS IP address