User's Manual

www.vyyo.com
Adding a Modem to the WMTS – p. 34
Chapter 5. Adding a Modem to the
WMTS
NOTE: These instructions are required for all modems.
If you are adding a T1 modem then you must also
perform the step in Chapter 6, Configuring a T1
Connection to finish the installation.
Use the instructions in this chapter to setup a data modem or the data portion of
an E1/T1 modem and configure the WMTS to communicate with it over IP.
This chapter covers the following topics:
1. Section 5.1 Editing the Modem Configuration File describes the steps
necessary to setup the modem configuration file.
2. Section 5.2 DHCP Settings for the Modem explains how to set (bind) the
modem’s IP address and configuration file using either ipLease or the
Windows 200x Server Edition DHCP Server. explains how to set (bind)
the modem’s IP address and configuration file using either ipLease or
the Windows 200x Server Edition DHCP Server.