User's Manual

System Configuration Guide
www.vyyo.com
Adding a Modem to the WMTS – p. 38
5.1.2 Setting the Downstream Frequency
In the following example, the Downstream Frequency is changed to 743 MHz.
1. From the main screen shown below select “General Parameters” and
then choose “Downstream Frequency”.
6. Right-click on “Downstream Frequency” and select “MODIFY” to display
the popup window in which you may set the value of the downstream
frequency in Hertz (note the six zeroes).
NOTE: This value will be specified by your system
engineer.
Figure 5-2 Setting Downstream Frequency