User's Manual

System Configuration Guide
www.vyyo.com
Configuring a T1 Connection – p. 79
5. Create a second Class of Service (aka. QoS or Service ID). Select and
right-click “Class of Service”, then select the “Duplicate” option. This is
necessary to add the “Voice” (or “WAN”) service for the T1 connection.
NOTE: the first Class of Service was created previously
for the data only connection. This second Class of
Service is specifically for the T1 connection so make sure
it is setup that way. The same upstream channel is used
for both.
Figure 6-3. Duplicating the QoS Value