User's Manual

Vyyo Installation Guide
www.vyyo.com
Configuring a T1 Connection – p. 87
5. A new modem icon will appear on the WMTS tree window pane. Enter
the last three bytes of the Vyyo modem MAC address and press the
“Update” button then press “OK” on the popup window which confirms
the “success” of the update.
Note: The first three bytes of the Vyyo MAC address (the
vendor ID) are displayed both in the navigation tree on
the left and in the data entry window on the right.
Figure 6-15: Vyyo Modem Configuration Information
Figure 6-16: Update Success Confirmation
Enter the last part of
the Vyyo modem
MAC address here
Press the update button
after entering the MAC
address