DCAM550 ToF Camera User Manual -20210906

To eliminate the multipath effect, you should:

1. Keep the camera working environment as clean as possible;

2. Avoid the camera be placed at concave forms environment, like corners of a room

or inside of a narrow space;

3. Highly-reflective object shall be removed far away from the measurement target;

5.3 Reflectivity of the Target

Please note that different reflectivity of the target may cause measurement result

deviation, objects which have 20% to 80% reflectivity to 850nm or 940nm infrared

light have the best result.

5.4 Scattering Effect

Scattering light effect is a noise factor to ToF products, it is caused by multiple

reflection inside the lens of camera or the cover of camera.

To eliminate the scattering light effect, you should:

1. Keep the cover glass of the camera clean;

2. Do NOT place any other cover glass in front of the camera;

3. Keep the camera working environment as clean as possible;