DCAM550 ToF Camera User Manual -20210906

29
DCAM550-P
 Power Off: product do not have any power
 Broadcast: broadcast IP address, socket have not connected
 Connected: socket is connected, product can transfer image and answer
host command
 Factory Reset: resume all data to factory setting
 TOF Driver Upgrade: product is in upgrading of TOF driver
 System Upgrade: product is in upgrading of firmware
6.5 Software Command Set
DCAM550 support different work mode like depth_30, IR_30, depth&IR_30.
Three default range: range0(0.35m~1.5m), range1(0.35m~1.5m),
range2(0.8m~4.4m), range5(1.2m~6.0m).
User can use Frameviewer to try the different command or can use the APIs to control
the camera. The details please reference the SDK documents.
6.6 USB Connection
DCAM550 use UVC profile to transfer image and control command.