User's Manual

ManualsBrandsW@nyou ManualsElectronicsSmart Watch

ⅠAppearance

1. Get to Know the Smart Bracelet and TWS Earbuds 2 in 1.

A.This product is sleek design, with TWS earbuds inside smart bracelet. Slim bracelet body

and earbuds. Easy and friendly to use. Comfortable wearing experience.

B.This product is with 0.96 inch TFT display.

C.To ensure smart bracelet’s battery life, smart bracelet will stop charging earbuds when

battery level is low.

2. Earbuds Pairing and Connection with Smart Device

This product comes with two TWS earbuds. One is for Left ear (L) and the other is for Right

ear (R).

Two earbuds already finished pairing in factory. Taken out from smart bracelet, they will

begin automatic pair. During this pairing process, at first two earbuds will flash at the same time.

After a little while one of them will stop flashing. This means they are paired successfully.Then

enable BT of your smart device and search for N8. Connect it and you will hear with both of

earbuds.

3. Voice Indication

There is voice indication when two earbuds are taken out from smart bracelet.

4. BT Operation Process

This process needs to be operated when smart bracelet is connected with smart phone for

the first time.

5. Packing list

Smart Bracelet×1 Gift Box×1

TWS Earbud×2 Charging Cable×1 User Manual×1

6. Charging

Smart bracelet charge: use magnetic charging cable

Summary of content (11 pages)

PAGE 1
ⅠAppearance 1. Get to Know the Smart Bracelet and TWS Earbuds 2 in 1. A.This product is sleek design, with TWS earbuds inside smart bracelet. Slim bracelet body and earbuds. Easy and friendly to use. Comfortable wearing experience. B.This product is with 0.96 inch TFT display. C.To ensure smart bracelet’s battery life, smart bracelet will stop charging earbuds when battery level is low. 2. Earbuds Pairing and Connection with Smart Device This product comes with two TWS earbuds.
PAGE 2
TWS earbuds charge: Put earbuds into smart bracelet and smart bracelet will charge earbuds. The charge will disconnected when earbuds are fully charged. Ⅱ Smart Bracelet Connection Instruction 1. Basic functions ·Two Stereo TWS Earbuds. Each one can be used independently or together ·Heart rate monitor ·Blood pressure monitor ·Pedometer, Calories ·Sleep monitor, sedentary alert and music ·MSM alert and push ·Selfie ·Find smart bracelet and find mobile phone 2.
PAGE 3
4. Attentions Should Be Paid to When Connecting 1）Make sure your smart device BT is on 2）Make sure battery level is sufficient. Power on or charge it when necessary. 3）Make sure it is within BT range of 50 cm 4）In case that you could not find the smart bracelet name N8-J in the APP, please check if your smart device allow LookFit to have access to smart device. Ⅲ Smart Bracelet Main Functions Power on/off Power on: Long press ◎ for 3 seconds. Screen will go off when no operation for 5 seconds.
PAGE 4
Calories Go to Calories menu to view current calories. Long press touch button ◎ and then it will show weekly history of calories. Screen will go off when no operation for 5 seconds Distance (KM) Go to KM menu to view current distance. Long press touch button ◎ and then it will show weekly history of steps. Screen will go off when no operation for 5 seconds. Hear Rate Monitoring Go to heart rate menu and long press touch button ◎ to start consecutive monitoring of heart rate.
PAGE 5
Sleep Monitoring Go to sleep monitoring menu and long press ◎ to check current sleep data.Screen will go off when no operation for 5 seconds. Blood pressure monitoring Go to blood pressure menu and long press ◎ to start monitoring. The testing time range is varied due to wearer’s different physical status-quo. It is normal to take some time. Please keep patient. During test, the value will show as ---/---.
PAGE 6
Remote to Take Selfie Go to More menu＞Photo. Long press ◎ to take photo.Screen will go off when no operation for 5 seconds. Find Smart Phone Go to More menu＞Find phone. Long press ◎ to find mobile phone.Mobile phone will vibrate and sound to remind you where your phone is left. Screen will go off when no operation for 5 seconds. Music Go to More menu＞Music. Long press ◎ to control music play/pause, next/previous song.Screen will go off when no operation for 5 seconds.
PAGE 7
Find Smart Bracelet In LookFit APP there is a function to find smart bracelet. Click that Find Device option and the smart watch will vibrate for 3 to 5 seconds so as to remind you where the smart bracelet is. Alarm Clock On Alarm Clock menu, different alarms (time and repetition day) could be set. Click to view all Alarm Clock that already set. Sedentary Alert This function need to be enabled first in LookFit APP settings.
PAGE 8
Weather Go to Weather menu to check current weather. Screen will go off when no operation for 5 seconds. Incoming Call Alert When there is incoming call, smart bracelet will show the alert and option. Long press touch button ◎ to select the green answer icon. Long press ◎ again and mobile phone will answer phone call. When select red reject icon, long press ◎ to make mobile phone reject the phone call. QR Code In the smart bracelet, there is QR code for downloading APP.
PAGE 9
Ⅳ TWS Earbuds Functions Instruction 1.Touch operation Single touch L: To decrease voice volume Single touch R: To increase voice volume Double touch L/R: answer/reject phone call or play/pause music Trio touch of L: previous song Trio touch of R: next song Quad touch of R/L: Siri Five consecutive touch of R/L：Switch earbud voice indication language between Chinese and English 2.
PAGE 10
Q: What if earbuds do not have voice even there is incoming alert on smart bracelet in answering phone call. A：There may be some deter during TWS earbuds. It may be as well to answer the phone when it buzzer for a few times. If the call is answered by the phone, please check if use the phone speaker or BT to answer the call. Q: I could not hear voice when I am wearing earbuds? A: Please make sure earbuds and smart device are within effective range and connected.
PAGE 11
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.