Data Sheet

we-online.com
Würth Elektronik eiSos GmbH & Co. KG - Data Sheet - REV 1.0
24/25
WPMDM1500602/ 171050601
MagI³C Power Module
VDRM - Variable Step Down Regulator Module
CAUTIONS AND WARNINGS
The following conditions apply to all goods within the product series of MagI³C
of Würth Elektronik eiSos GmbH & Co. KG:
General:
All recommendations according to the general technical specifications of the data-sheet have to be complied with.
The usage and operation of the product within ambient conditions which probably alloy or harm the component
surface has to be avoided.
The responsibility for the applicability of customer specific products and use in a particular customer design is always
within the authority of the customer. All technical specifications for standard products do also apply for customer
specific products.
Residual washing varnish agent that is used during the production to clean the application might change the
characteristics of the body, pins or termination. The washing varnish agent could have a negative effect on the long
term function of the product.
Direct mechanical impact to the product shall be prevented as the material of the body, pins or termination could flake
or in the worst case it could break. As these devices are sensitive to electrostatic discharge customer shall follow
proper IC Handling Procedures.
Customer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-
related requirements concerning its products, and any use of Würth Elektronik eiSos GmbH & Co. KG components in
its applications, notwithstanding any applications-related information or support that may be provided by Würth
Elektronik eiSos GmbH & Co. KG. Customer represents and agrees that it has all the necessary expertise to create
and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their
consequences lessen the likelihood of failures that might cause harm and take appropriate remedial actions.
Customer will fully indemnify Würth Elektronik eiSos and its representatives against any damages arising out of the
use of any Würth Elektronik eiSos GmbH & Co. KG components in safety-critical applications.
Product specific:
Follow all instructions mentioned in the datasheet, especially:
 The solder profile has to comply with the technical reflow or wave soldering specification, otherwise this will
void the warranty.
 All products are supposed to be used before the end of the period of 12 months based on the product date-
code.
 Violation of the technical product specifications such as exceeding the absolute maximum ratings will void
the warranty.
 It is also recommended to return the body to the original moisture proof bag and reseal the moisture proof
bag again.
 ESD prevention methods need to be followed for manual handling and processing by machinery.