Datasheet

WPMDB1600362Q / 171060302
MagI
3
C Power Module
VDRM – Variable Step Down Regulator Module
we-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0
©May 2016 5/48
ABSOLUTE MAXIMUM RATINGS
Caution:
Exceeding the listed absolute maximum ratings may affect the device negatively and may cause permanent damage.
SYMBOL PARAMETER
LIMITS
UNIT
MIN
(1)
MAX
(1)
VIN Input voltage -0.3 7 V
VOUT Output voltage -0.6 V
IN
V
FB Feedback voltage -0.3 3 V
UVLO Undervoltage lockout pin voltage -0.3 3.3 V
EN
Enable pin Voltage -0.3 7 V
Enable source current - 100 µA
RT/CLK
RT/CLK pin voltage -0.3 6 V
RT/CLK source current - ±100 µA
SS/TRK
SS/TRK pin voltage -0.3 3 V
SS/TRK pin sink current - ±100 µA
PG
Power Good pin voltage -0.3 7 V
Power Good sink current - 10 mA
COMP
Output of the error amplifier pin voltage -0.3 3 V
COMP sink current - 100 µA
INTSS Internal soft-start capacitor pin voltage -0.3 3 V
INTRRT Internal resistor for the initial switching frequency pin voltage -0.3 6 V
RCOMP Resistor of the compensation network pin voltage -0.3 3 V
CCOMP Capacitor of the compensation network pin voltage -0.3 3 V
VSENSE+ V
OUT
sense pin voltage -0.3 V
out
V
SW
Switch node pin voltage -0.6 7 V
10ns transient -2 7 V
BOOT Internal supply for the high MOSFET driver pin voltage -
V
SW
+8V
V
T
storage
Assembled, non operating storage temperature -65 150 °C
T
SOLR
Peak case/leads temperature during reflow soldering, max. 30sec.
(JEDEC J-STD020) Maximum three cycles!
- 245±5 °C
Mechanical shock: Mil-STD-883D, Method 2002.2, 1ms, ½ sine, mounted - 1500 G
Mechanical vibration: Mil-STD-883D, Method 2007.2, 20-2000Hz - 20 G