Data Sheet
WLMDU9456001JT / 172946001
MagI
3
C Power Module
LDHM - LED Step Down High Current Module
We-online.com Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0
© May 2016 29/35
HANDLING RECOMMENDATIONS
1. The power module is classified as MSL3 (JEDEC Moisture Sensitivity Level 3) and requires special handling due to
moisture sensitivity (JEDEC J-STD033).
2. The parts are delivered in a sealed bag (Moisture Barrier Bags = MBB) and should be processed within one year.
3. When opening the moisture barrier bag check the Humidity Indicator Card (HIC) for color status. Bake parts prior to
soldering in case indicator color has changed according to the notes on the card .
4. Parts must be processed after 168 hour (7 days) of floor life. Once this time has been exceeded, bake parts prior to
soldering per JEDEC J-STD033 recommendation.
SOLDER PROFILE
1. Only Pb-Free assembly is recommended according to JEDEC J-STD020.
2. Measure the peak reflow temperature of the MagI³C power module in the middle of the top view.
3. Ensure that the peak reflow temperature does not exceed 240°C ±5°C as per JEDEC J-STD020.
4. The reflow time period during peak temperature of 240°C ±5°C must not exceed 20 seconds.
5. Reflow time above liquidus (217°C) must not exceed 60 seconds.
6. Maximum ramp up is rate 3°C per second
7. Maximum ramp down rate is 6°C per second
8. Reflow time from room (25°C) to peak must not exceed 8 minutes as per JEDEC J-STD020.
9. Maximum numbers of reflow cycles is two.
10. For minimum risk, solder the module in the last reflow cycle of the PCB production.
11. For soldering process please consider lead material copper (Cu) and lead finish tin (Sn).
12. For solder paste use a standard SAC Alloy such as SAC 305, type 3 or higher.
13. Below profile is valid for convection reflow only
14. Other soldering methods (e.g.vapor phase) are not verified and have to be validated by the customer on his own risk
Temperature [°C]
Time [sec]
150
180
217
Max 245
Max 120 sec
Min 60 sec
Max 60 sec
Min 30 sec
Max 10 - 30 sec
240°C
Ramp Up Rate
Max 3°C/sec
Ramp Down Rate
Max 6°C/sec
Max 2 solder cycles !
Preheat
Liquidus
Peak