Datasheet

Packaging Specification - Reel:
T
top cover
tape
Packaging is referred to the international standard IEC 60286 -3:2013
Carrier tape
Cover tape
S
P2
B0
A0
Ed
W
B1
D0
D1
P1
K0 T1
T2
No Component
min. 160 mm
Components No Component
min. 100 mm
Cover Tape
min. 400 mm
End
Feeding direction
Start
P0
A0 B0 B1 W T T1 T2 K0 P0 P1 P2 D0 D0 / 2 D1 d E S F Tape Type 2a VPE / packaging unit
tolerance ±0,1 ±0,1 typ. ±0,2 ±0,05 typ. ±0,1 ±0,1 ±0,1 ±0,1 ±0,1 +0,1/ -0,0 +0,05/ -0,0 ±0,1 +0,05 ±0,1 ±0,1 ±0,1 pcs.
size 1510 16,90 15.9 21.3 32 0.5 0.2 10.8 10.3 4 28 2 1.5 0.75 1.5 0.2 1.75 28.5 14.2 Polystyrene 150
1 6 5 ° - 1 8 0 °
Pull-of force
Tape width
32 mm
0,1 N - 1,3 N
B
B
B
OC
O
D
A
W3
W2
N
W**
close to center
A B C D N W1 W2 W3 W3
tolerance ±2,0 min. ±0,8 min. ±2,0 +2 max. min. max.
Tape width 32 mm 330 1.5 13 20.2 80 32.4 38.4 31.9 35.4
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED CHECKED GENERAL TOLERANCE PROJECTION
METHOD
KaS DDe DIN ISO 2768-1m
DESCRIPTION
WE-XHMI SMD Power Inductor
ORDER CODE
74439370047
SIZE REVISION STATUS DATE BUSINESS UNIT PAGE
1510
001.001 Valid 2016-07-20 eiSos 4/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.