Data Sheet

Dimensions: [mm]
P
O F
L15,0 min.
4,0 min.
O
D
Vent
+
-
Properties Value Unit Tol.
Diameter Ø D 10 mm ±1.5
Length L 20 mm ±1.5
Pitch P 5 mm ±0.5
Pin Diameter Ø F 0.6 mm ±0.02
Pitch p 5 mm ±0.5
Hole Diameter Ø f 0.9 mm ±0.02
Dimensions:
Recommended Hole Pattern: [mm]
O
f
p
Schematic:
Properties Test conditions Value Unit Tol.
Capacitance C 10 mA/ F 5 F +30%/-10%
Rated Voltage U
R
@ 65 °C 2.7 V (DC) max.
Rated Voltage U
R
@ 85 °C 2.3 V (DC) max.
Surge Voltage U
S
@ 65 °C 2.85 V (DC) max.
ESR R
ESR DC
10 ms 50 mΩ max.
ESR R
ESR AC
5 mV @ 1 kHz 40 mΩ max.
Rated Discharge Current I
Rated
1.29 A typ.
Max. Discharge Current I
Max
5.4 A typ.
Leakage Current I
Leak
72 hrs. @ UR 0.012 mA typ.
Power Density P 17.35 kW/ kg typ.
Energy Density E 2.41 Wh/ kg typ.
Electrical Properties:
Storage Conditions
(in original packaging)
15 °C - 35 °C; 10 % up to 75 % RH
Operating Temperature -40 up to +65 °C
Life Cycle 500000 Cycles
Weight m 2.1 g
Test conditions of Electrical Properties: +20 °C, 35 % RH if not specified differently
Component conform to REACh and RoHS requirements and standards
General Information:
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION
METHOD
ReKa 001.001 2019-01-29 DIN ISO 2768-1m
DESCRIPTION TECHNICAL REFERENCE
WCAP-STSC Supercapacitors
(EDLC‘s)
STP1020505Q2R7DSPB95000
ORDER CODE
850617021001
SIZE/TYPE BUSINESS UNIT STATUS PAGE
10.0 x 20.0 eiCap Valid 1/9
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.