Data Sheet

Properties Definition
Adhesive
Strength of
Termination
0402 & 0603 10 ±1 sec; 5 N
> 0603 10 ±1 sec; 10 N
Vibration
Resistance
all 3 directions, 2 hours each @ 10 - 55 Hz/ min., amplitude 0.75 mm
or 10 g
Resistance to
Solder Heat
Specific Refer to Soldering Profile
Substrate
bending test
all 5 ±1 sec; 5 mm
Mechanical Properties: Substrate Bending Test:
The capacitor shall be soldered on the test substrate (see Figure) and gradually bent to a depth, D with a speed
of 1,0 mm/s ± 0,5 mm/s.
Flexure(D): 5mm
Pressure maintaining: 5 ±1 sec.
This substrate bending test is for all size of WCAP-CSST.
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED CHECKED GENERAL TOLERANCE PROJECTION
METHOD
KaS PSL DIN ISO 2768-1m
DESCRIPTION TECHNICAL REFERENCE
WCAP-CSST Soft Termination
MLCC
X7R1206105K050DFCT1S000
ORDER CODE
885382208005
SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE
1206
001.000 Valid 2018-11-12 eiCap 2/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.