Instructions / Assembly

ManualsBrandsW Unlimited ManualsAdirondack ChairsClassic Navy Blue Folding Wood Adirondack Chair

Important Safety Instructions:

Please read this instruction carefully prior to assembly

Please ensure all parts and hardware are available in the package prior to assembly

Use the parts and hardware lists to identify each component included

Save all packaging material until the completion to avoid any accidental discarding of smaller

parts or hardware

It is recommended to install the product by two people

ASSEMBLY INSTRUCTIONS

THANK YOU FOR PURCHASING

1/8

Please align pre drilled holes accurately during installation

Please insert screws in the right angle

This product can be damaged if parts are not correctly assembled

Assembly tips:

ITEM#: SW1912

Please read this before beginning assembly and follow instructions carefully

(90 degrees)

Summary of content (8 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS ITEM#: SW1912 Please read this before beginning assembly and follow instructions carefully Important Safety Instructions: Please read this instruction carefully prior to assembly Please ensure all parts and hardware are available in the package prior to assembly Use the parts and hardware lists to identify each component included Save all packaging material until the completion to avoid any accidental discarding of smaller parts or hardware It is recommended to install the product by t
PAGE 2
PARTS LIST ARM REST 2PCS A1R A1L ARM REST SUPPORT 2PCS A2L A2R BACK REST PANELS 7PCS BASE LEG 2PCS C4 C5 C3 C2 C1 C6 C7 B1R B1L BASE BOTTOM SUPPORT 1PC SEAT SLATS 5PCS FRONT SEAT SLAT 1PC BASE LEGS CROSS BEAM 1PC TOP BACK REST CROSS BEAM 1PC MIDDLE BACK REST CROSS BEAM 1PC B4 B5 B3 B2 C8 C9 BOTTOM BACK REST CROSS BEAM 1PC FRONT LEG 2PCS FRONT LEG CROSS BEAM 1PC ARM REST CONNECTION 2PCS FOLDING BRACKET 2PCS C10 F1R F1L D E 2/8
PAGE 3
HARDWARE LIST a b c e BOLT (3.
PAGE 4
ASSEMBLY INSTRUCTION STEPS Please make sure that there is no space between the top parts and the bottom parts before turning the screws. Step 1 a Step 2 a a a C4 a C1 a C8 C7 a a a C9 C10 Step 3 C2 C3 C5 C6 a a a Do not tighten bolts until all parts are connected and aligned.
PAGE 5
Step 5 B4 a B5 Step 6 Align edges Step 7 a D F1R a D F1L The top plane of part D should be aligned with the top edge of F1R and F1L to avoid the wood damage caused by misaligned position when turning the screws.
PAGE 6
Step8 c Step9 a F2 a Bevel UP E c 6/8
PAGE 7
Step10 b Step11 b c E 7 /8
PAGE 8
Step12 b c b Final Assembly 8/8