SETUP INSTRUCTION ilumenight Color Changing Instruction Manual v. 1.0 Written with Tunable Color v. 4.1.3 System Requirements: iOS 8.
Accent 12V Color Changing Wall Wash 12V Color Changing Color and brightness controlled with Ilumenight™ mobile app Color and brightness controlled with Ilumenight™ mobile app 2d" 4a" 6s" 68" 5d" Input Power Brightness Beam Angle CRI Rated Life 3w" Input Power Brightness Beam Angle CRI Rated Life 9-15VAC 0.5W to 14.5W / 1VA to 17VA Up to 355 lm 15° to 60° 95+ 45,000 hours 9-15VAC 0.5W to 14.
TABLE OF CONTENTS 1. Overview 2 2. Getting Started 3 2.1 Create Account 2.2 Login with an Account 2.3 ‘Do This Later’ (Login without an Account) 3. Main Screen 5 4. Commissioning Screen 6 4.1 Commissioning Controls 4.2 SceneSet® 5. Options Menu 9 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.
1. OVERVIEW The WAC ilumenight Color changing iOS app enables control of Bluetooth-equipped araya modules incorporated into a lighting fixture. The app is designed for use by professional lighting specifiers and designers. System Requirements: iOS 8.4+ Type “ilumenight” in the Search window in the App Store screen to view and downloadthe app on your iOS device.
2. GETTING STARTED Make sure that the lighting fixture is turned on. Download the latest version of the WAC ilumenight color changing app from the App Store and launch the app (version 4.1.3 as of this writing). ilumenight ilumenight Create a new account name and password to secure and control any Bluetooth-equipped unlocked lamps that are “discovered” by the app with a green icon. Lamps with a magenta icon cannot be controlled (see Main Screen section for further details).
2. GETTING STARTED Make sure that the lighting fixture is turned on. 2.2 Login with an Account If you have already created an account, you can log in by entering your email address and your password and then pressing “OK”. When you log in with your password, you will be able to control any lamps that you have previously secured with this password, as well as control any unlocked lamps (with a green icon).
3. MAIN SCREEN The main screen lists all discovered lamps and shows a default group name (see Commissioning Screen section on how to rename the lamp and/or group). In the main screen, the lamps can be turned on and off by tapping the on/off icon on the left of the slider. The lamps can also be dimmed by moving the slider right or left, or by tapping to the right or left of the slider. The dimming level as a percentage of light output is shown to the right of the slider.
4. COMMISSIONING SCREEN 4.1 Commissioning Controls The lamp can be commissioned by dragging the sliders left or right, tapping on either side of the slider circle to move at preset values, or pressing and holding along the slider for one second to bring up a numerical keypad for direct entry of the value. When using the direct entry option, you can also use the two arrows located on the top left of the numerical keypad; tap on either arrow to automatically increase or decrease the value. 4.1.
4. COMMISSIONING SCREEN 4.1.3 Saturation Saturation adds gradients of color to a white point. Saturation can be added in increments of 1%, from 0 - 100% (fully saturated). Tapping on either side of the slider moves the lamp in 10% increments. Pressing and holding along the slider will bring up a keypad for direct entry of the saturation percentage. Enter the percentage and then touch “Done”. 4.1.4 Hue Hue enables different colors to be added to the light in values from 1 to 60.
4. COMMISSIONING SCREEN 4.2 SceneSet® Allows up to five scenes to be programmed into the lamp and recalled by simply tapping one of the five SceneSet buttons. To activate SceneSet, tap on any one of the SceneSet rectangles (labeled “1”, “2”, “3”, “4” or “5”). Commission the lamp as previously described. To save scenes, press and hold one of the SceneSet buttons until either a beep is heard (iPod and iPad) or the device vibrates.
5. OPTIONS MENU (UPPER RIGHT OF COMMISSIONING SCREEN) 5.1 Add New Group (only active when logged in) New groups can be created and named here first, and then the lamp(s) belonging to each new group can be chosen directly on the Main Screen. This process makes it easier to group many lamps at a time.
5. OPTIONS MENU (UPPER RIGHT OF COMMISSIONING SCREEN) 5.2 Discovery Distance This changes the discovery distance. When commissioning multiple lamps, reducing the discovery distance enables connection to the closest lamp. 5.3 Logout Logs out of the current account. 5.4 Change Password (only active when logged in) Changing the password will change the current account password.
5. OPTIONS MENU (UPPER RIGHT OF COMMISSIONING SCREEN) ilumenight 5.7 About This App Provides information about the release and build number of the app. If you tap on the website link provided, the app will exit and take you to a web browser pointing to the WAC LIGHTING website. http://waclandscapelighting.com 5.8 Support Please call our technical support team at 800.526.2588 5.9 Legal Provides necessary and important legal information about the nature and use of the app.
www.waclandscapelighting.
