Specification Sheet

Fixture Type:
Catalog Number:
Project:
Location:
WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Avenue • Ontario, CA 91760
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. MAR 2014
NONENCLOSED ELECTRONIC
Transformers
PRODUCT DESCRIPTION
Low Voltage electronic transformer designed to be used as a replacement part for factory installed transformers.
Transformer may be safely loaded to 100% of stated capacity.
FEATURES
• 1W minimum load
• All connections must be made in an enclosure for proper installations
• Dimmable with electronic low voltage dimmers. Dimmers should always
be installed on the primary side of the transformer.
SPECIFICATIONS
Construction: Built-in auto reset, soft start, short and overload circuit
protection features. The soft start delayed start feature extends lamp life
by delaying the abrupt inrush current to the lamp.
Output: 12V, 24V
Frequency: 20khz
Details: In the case of a system overload or short circuit the transformer
will revert to a “hold” position and then automatically reset the syst
em when the problem is solved. System protection is designed to last
several hours.
Standards: UL ready components
ACCESSORIES
Multiple Terminal Block
Accommodates up to 6 output connections for 14 AWG wires. Terminal
block is used to easily wire together multiple output connections for a
neat under cabinet installation without the use of open splices. Perfect
for wiring up to 3 button lights at 20W or 6 button lights at 10W.
Model L W H
MTB-01
34" 1w" d"
EN – – R-AR
Example: EN-24150-R-AR
ORDER NUMBER
Model Output L W H
EN-12100-R-AR
EN-12150-R-AR
EN-24150-R-AR
12V, 100W
12V, 150W
24V, 150W
32"
32"
32"
12"
12"
12"
14"
14"
14"