Specification Sheet

Fixture Type:
Catalog Number:
Project:
Location:
WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Avenue • Ontario, CA 91760
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. MAR 2014
CLASS 2 ENCLOSED ELECTRONIC
Transformers
PRODUCT DESCRIPTION
Combining Class 2 Transformers in a single package creates a single source to wire multiple runs of low voltage xtures
such as under cabinet and display luminaires.
FEATURES
• 1W minimum load
• Secondary wiring for Class 2 transformers does not require
conduit sheathed cable or clamp wiring techniques
• Intrinsically safe, Class 2 transformers permit no greater than
a 5 amp current be drawn
• Non-metallic sheathed cable may be used for secondary wiring
in walls and ceilings
• Drop down to a smaller gauge wire if space in xture does not
permit secure connection directly with the non-metallic sheathed cable
• Powers most cabinet xtures
SPECIFICATIONS
Construction: Built-in auto reset, soft start, short and overload circuit
protection features. The soft start delayed start feature extends lamp life
by delaying the abrupt inrush current to the lamp.
Output: 12V / 24V
Frequency: 20khz
Dimming: Dimmable with electronic low voltage dimmers.
Dimmers should always be installed on the primary side of the
transformer.
Details: Enclosure has knockouts on three sides. Screw holes are located
on one long side for securing enclosure in place.
Standards: UL Listed
EN – –
Example: EN-12180-RB2
ORDER NUMBER
Model Output L W H
EN-1260-RB2
EN-2460-RB2
EN-24100-RB2
EN-12120-RB2*
EN-12180-RB2*
EN-12300-RB2*
12V, 60W
24V, 60W
24V, 96W
12V, 2 x 60W
12V, 3 x 60W
12V, 5 x 60W
6s"
6s"
6s"
6"
6w"
84"
1s"
1s"
1s"
34"
3s"
4s"
18"
18"
18"
2s"
2s"
2s"
*Includes LED indicator lights and integral push-in terminals
ACCESSORIES
Multiple Terminal Block
Accommodates up to 6 output connections for 14 AWG wires. Terminal
block is used to easily wire together multiple output connections for a
neat under cabinet installation without the use of open splices. Perfect
for wiring up to 3 button lights at 20W or 6 button lights at 10W.
Model L W H
MTB-01
34" 1w" d"