Specification Sheet

Fixture Type:
Catalog Number:
Project:
Location:
WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Avenue • Ontario, CA 91760
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. APR 2014
CLASS 2 REMOTE ELECTRONIC
Transformers
PRODUCT DESCRIPTION
Low Voltage electronic transformer designed to be used as an enclosed remote transformer. Enclosure has separate compartments for transformer,
line and low voltage wiring. Transformer may be safely loaded to 100% of stated capacity.
FEATURES
• U.L. 2108 listed electronic low voltage transformer.
• Built-in auto reset, soft start, short and overload circuit protection
features. Soft start delayed start feature extends lamp life.
• Dimmable with electronic low voltage dimmers. Dimmers should
always be installed on the primary side of the transformer.
• In the case of a system overload or short circuit the transformer will
revert to a “hold” position and then automatically reset the system when
the problem is solved. System protection is designed to last several hours.
• 1W minimum load; 60W maximum load
SPECIFICATIONS
Input: 120V (50/60Hz)
Output: 24V
Frequency: 20khz
Standards: UL Listed
ACCESSORIES
Multiple Terminal Block
Accommodates up to 6 output connections for 14 AWG wires. Terminal
block is used to easily wire together multiple output connections for a
neat under cabinet installation without the use of open splices. Perfect
for wiring up to 3 button lights at 20W or 6 button lights at 10W.
Model L W H
MTB-01
34" 1w" d"
EN – – RB2-T
Example: EN-24100-RB2-T
ORDER NUMBER
Model Output L W H
EN-2460-RB2-T
EN-24100-RB2-T
24V, 60W
24V, 96W
62"
6s"
1s"
1s"
14"
18"