CLEAN Installation Instructions Compatible with works with the Google Assistant
Please read and review instructions before installation
GENERAL INQUIRIES FAN SUPPORT For all questions about your ceiling fan please read all included instructions, installation procedures, troubleshooting guidelines and warranty information before starting installation For fast service have the following information below when you call: For missing parts or general inquiries call our trained technical staff at: • • • 1-800-526-2588 1-800-526-2588 option 0 Model Name and Number Part Number and Part Description Date Of Purchase and Purchase Location op
SAFETY RULES For operation, maintenance, and troubleshooting information, visit www.waclighting.com/fan-support 1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker before beginning. 2. All wiring must be in accordance with the National Electrical Code “ANSI/ NFPA 70” and local electrical codes. Electrical installation should be performed by a licensed electrician. 3.
02 WARNING: Do not install or use your fan if any part(s) is/are damaged or missing. This product is designed for use only with the supplied parts and/or accessories designated for use with this product by WAC. Substitution of parts or accessories not designated for use with this product by WAC could result in personal injury or property damage and will void the warranty. Contact an authorized dealer or the manufacturer if any parts are damaged or missing.
GET SMART All WAC Smart Fans are: Wet location-listed to the strictest Coordinate with smart devices DC UL/cUL safety regulations for voice-activated control MOTOR Wi-Fi and Bluetooth enabled Compatible with our WAC app for unlimited control The WAC app synchronizes seamlessly with smart home devices you already own works with the Google Assistant APP DOWNLOAD Available for purchase on the Google Pay and App Store WALL CONTROL WC20-WT Included with each fan 6 fan speeds Dims light to 1% ON/OFF
TABLE OF CONTENTS 4 Package Contents 9. Mounting Options 10. Installing the Mounting Bracket 10. Attaching the Fan Blades 11. Hanging the Fan 12. Making the Electrical Connections 14. Installing the Wall Control 15. Finishing the Installation 17. Installing the Luminaire Module 18. 11 Controlling the Fan 20. 12 Factory Reset 21. 13 App Instructions 22. 14 Accessories 24.
03 TOOLS & MATERIALS REQUIRED Phillips screwdriver Step ladder Wire cutters Electrical tape NOTE: Before discarding packaging materials, be certain all parts have been removed. NOTE: Place the parts from the hardware bag into a small container to keep them from being lost. MAC ID IMPORTANT: Please make note of the MAC ID on the receiver and keep it in a safe place.
PACKAGE CONTENTS 04 3 Fan Blade 5 Downrod Assembly 2 4 Mounting Bracket 1 RPL-HGR-ASM- Blade Collector Ring ** 12 Luminaire Module (Optional) F3IN-120V-R1-30 (Optional) Glass Shade 14 RPL-F003-COVER-** 13 (Optional) RPL-F003-GLA 8 Coupling Cover Luminaire Cover Adapter Plate 11 Canopy Ring RPL-CAN-RND-** Motor Housing 6 10 9 7 RPL-F003-52-** Receiver F-R3-003-052 RPL-003-PARTS RC20-WT Safety Cable Safety Cable 10 x 76mm Pan head Philips wood screw (1pc) RPL-CAN-RND-**
05 MOUNTING OPTIONS INSTALLING THE MOUNTING BRACKET 1 2 Standard Ceiling Slope Ceiling CAUTION: To prevent electrical shock, ensure electricity has been Caution: Remember to disconnect the power at the circuit breaker. 1. aside for use in Finishing the Installation. turned off at the circuit breaker before beginning. Figures 1 and 2 are examples of different ways to mount the outlet box. 10 Remove 1 set screw from mounting bracket and set 2.
ATTACHING THE FAN BLADES 06 3 1. Place blade on motor and secure with the blade attachment, screws and washers. 2. Insert blades in slots, aligning with motor assembly holes. 3. Secure blades with blade attachment screws & washers. 4. Remove set screws from motor housing, install blade collector ring (when applicable), and re-install screws.
07 HANGING THE FAN 4 1. 5 Remove screw from hanger ball. Remove hanger ball and cross pin. 2. 12 1. Install coupling cover, canopy screw ring, canopy and downrod assembly into motor housing as shown. Loosen 2 screws, clevis pin and cotter pin.
HANGING THE FAN 07 7 6 1. Align downrod and motor collar holes, re-insert pins and screws. 1. Seat all into the mounting bracket. Rotate until ball drops and 2. Slip up canopy and canopy screw cover. Re-install hanger ball locks into hanger bracket screw. with cross pin in correct place.
07 HANGING THE FAN MAKING THE ELECTRICAL CONNECTIONS 8 9 Outlet Box Black (hot) Black (“AC IN L”) Receiver Red (to motor) Gray (to motor) Yellow (to motor) Yellow (motor) Gray (motor) Red (motor) 1. 14 Secure safety cable to structure. White (neutral) Green (ground) White (“AC IN N”) Green (ground) To Hanger Ball Green (ground) To Hanger Bracket White (for light) Blue (for light) Green (ground) White (for light) Blue (for light) 1.
INSTALLING THE WALL CONTROL 08 10 WHITE WHITE BLACK (TO FAN) RED BLACK (FROM BREAKER) BLACK COPPER GREEN (GROUND) GROUND WHITE (NEUTRAL) WALL OUTLET BOX WALL CONTROL NOTE: Wall control not included. A Bluetooth wall control accessory can be purchased separately. NOTE: For multi-location wiring, skip to the next step. 1.
08 INSTALLING THE WALL CONTROL if Applicable Wall Controller 1 Wall Controller 2 Wall Controller 3 White to Fan Black to Fan HOT IN 16 Green White Red Black Green Red White Black Green Red White Black Green to Fan Green 1. Install the wall control using the wiring diagram in below. 2. Individually pair each of the wall controls with the fan receiver using the pairing instructions in section 19.
09 FINISHING THE INSTALLATION 11 12 1. Secure wire connectors with supplied wire ties. 2. Install canopy to mounting bracket with the screw re- 1. Install canopy screw ring as shown. moved in section 2.
10 INSTALLING THE LUMINAIRE MODULE When installing the Luminaire verison (F3IN-120V-R1-30) 13 14 Remove 1 of 3 screws and loosen the others (do not remove). 1. Attach LED wires from motor assembly to luminaire module. Using the screw from the previous step, install the adapter plate. 2. Install glass shade without over-tightening.
INSTALLING THE LUMINAIRE MODULE When installing the Luminaire verison (F-003L) 10 16 15 Connection plugs Adapter Plate LED Luminaire Module 1. Screws Secure the luminaire module with the 3 screws to the 1. Install glass shade without over-tightening. adapter plate.
11 CONTROLLING THE FAN 17 18 19 A Summer Mode B (Counter-Clockwise) Air-Gap Switch* C Wall Control Remote Pairing Unpairing * Air-Gap Switch only included Control Press and hold buttons To purge, press and hold buttons for 4 seconds. with wall control for 10-15 seconds. (Clockwise) Your fan is pre-paired. If you need to pair your fan refer to NOTE: Your fan features 6 speeds. An audible tone will indicate step 18. when the speed is increased or decreased.
FACTORY RESET 20 21 12 22 WACFan_841812 Fan Wi-Fi Reset Press and hold the and buttons until the LED Factory Reset Receiver Factory Reset Press and hold buttons for 10 seconds Press the reset button on the receiver until the receiver beeps blinks green and the receiver beeps NOTE: Changes to your Wi-Fi network settings (SSID or Security NOTE: Factory reset will remove remote control(s), wall control(s) Passphrase) will prevent your fan from connecting to the cloud. and WAC app connections.
13 APPLICATION In addition to the included control, you can operate your fan with the WAC app*. Upgradeable with Smart Features Scan the code to the right with your phone to find out how you can enable smart features through the WAC app and integrate with your smart home ecosystem. 1. Press light toggle and season toggle and hold for 4 seconds to enable Wi-Fi. 2. To use the WAC app, download it from the App Store or Google Play. 3. Open the app to create your account.
APPLICATION 6. 13 The WAC app will walk you through the main screen and show you how to create schedules, change fan speeds, dim the light, switch between Summer and Winter Modes, invite users, create groups and much more. Please refer to the WAC app instructions for more details. **Additional purchase required to enable app control and integration.
14 ACCESSORIES Product 24 Model Description Finish Bluetooth Wall Control WC20- 6 fan speeds, dims light to 1% Works in conjunction with WAC Smart Fan receiver (not included) WT Coupler DC- Connects two downrods BA, BN, MB, MW Slope Ceiling Kit SC- Designed to accommodate buildings with steeper sloped ceilings up to 45° or 12/12 pitch BA, BN, MB, MW Bluetooth Remote Control RC20- Compatible with WAC Smart Fans 6 fan speeds, dims light to 1% WT F-003
ACCESSORIES Product Downrod F- 0 0 3 Model Description 14 Finish DR-12 12” downrod BA, BN, MB, MW DR-18 18” downrod BA, BN, MB, MW DR-24 24” downrod BA, BN, MB, MW All our downrods are 1” O.D.
CERTIFICATE OF WARRANTY Congratulations on your new purchase. Your new WAC Smart Fan is engineered to make life easier every day. WAC creates futureforward fans and luminaires that provide energy savings and outstanding efficency. Our dedication to doing things the right way goes beyond our love for amazing products.
Félicitations pour votre nouvel achat. Votre nouveau ventilateur intelligent WAC est conçu pour vous simplifier la vie au quotidien. WAC crée des ventilateurs et des luminaires d’avant-garde qui permettent des économies d’énergie et une efficacité exceptionnelle. Notre engagement à bien faire les choses va au-delà de notre amour pour les produits étonnants.
F-003 waclighting.
