Troubleshooting Guide

F-00412
07 HANGING THE FAN
MAKING THE ELECTRICAL CONNECTIONS
Screws
120V Wires
UL/cUL Listed
electrical box
Mounting
Bracket
Mounting screws
supplied with outlet box
4
Red (motor)
Gray (motor)
Yellow (motor)
Yellow (to motor)
Gray (to motor)
Red (to motor)
Receiver
Blue (for light)
White (for light)
Blue (for light)
White (for light)
5
1. Connect the wires from fan to the corresponding wires on
the receiver.
2. Connect the wires from the outlet box to the corresponding
wires on the receiver.
NOTE: Follow wiring diagram found on the receive hardware.
1. Remove 2 opposing screws and loosen the others.
2. Pass supply wires through mounting plate.
3. Lift motor assemby and hang it on the hook on the mounting
plate using one of the screw holes.