HUG Installation Instructions works with the Google Assistant
Please read and review instructions before installation
GENERAL INQUIRIES FAN SUPPORT For all questions about your ceiling fan please read all included instructions, installation procedures, troubleshooting guidelines and warranty information before starting installation For fast service have the following information below when you call: For missing parts or general inquiries call our trained technical staff at: • • • 1-800-526-2588 1-800-526-2588 option 0 Model Name and Number Part Number and Part Description Date Of Purchase and Purchase Location op
SAFETY RULES For operation, maintenance, and troubleshooting information, visit waclighting.com/help. 1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker before beginning. 2. All wiring must be in accordance with the National Electrical Code “ANSI/ NFPA 70” and local electrical codes. Electrical installation should be performed by a licensed electrician. 3.
02 WARNING: Do not install or use your fan if any part(s) is/are damaged or missing. This product is designed for use only with the supplied parts and/or accessories designated for use with this product by WAC. Substitution of parts or accessories not designated for use with this product by WAC could result in personal injury or property damage and will void the warranty. Contact an authorized dealer or the manufacturer if any parts are damaged or missing.
GET SMART This WAC Smart Fan is: Damp location-listed to the strictest UL/cUL safety regulations Wi-Fi and Bluetooth enabled for unlimited control Coordinate with smart devices for voice-activated control Compatible with our WAC app The WAC app synchronizes seamlessly with smart home devices you already own works with the Google Assistant APP DOWNLOAD Available for purchase on the Google Pay and App Store WALL CONTROL WC20-WT Optional Accessory Sold Separately 6 fan speeds Dims light to 1% ON/OFF RE
TABLE OF CONTENTS 4 Package Contents 9. Mounting Options 10. Installing the Mounting Bracket 10. Attaching the Fan Blades 11. Hanging the Fan 12. Making the Electrical Connections 12. Installing the Optional Wall Control 13. Installing the Adapter Plate 14. Installing the Luminaire Module 15. 11 Finishing the Installation 17. 12 Controlling the Fan 18. 13 Factory Reset 21. 14 App Instructions 22. Accessories 24. Troubleshooting 25.
03 TOOLS & MATERIALS REQUIRED Phillips screwdriver Step ladder Wire cutters Electrical tape NOTE: Before discarding packaging materials, be certain all parts have been removed. NOTE: Place the parts from the hardware bag into a small container to keep them from being lost. MAC ID IMPORTANT: Please make note of the MAC ID on the receiver and keep it in a safe place. Hanging Weight: 12/12.5 lbs.
PACKAGE CONTENTS 04 2 Adapter Plate 3 1 Motor Housing Mounting Bracket RPL-HUG-HGR 7 4 Fan Blade RPL-F036-BD-44-** RPL-F037-BD-52-** 5 9 Glass Shade Cap RPL-HUG-GLA A: Junction Box #10 x 38mm Pan Head Phillip Screws (2) Ø5 x 14 x 1mm Flat Washer (2) 6 LED Module F4IN-120V-R1-30 8 Receiver F-R3-036-044 F-R3-037-052 Remote Control RC20-WT Hardware Bag RPL-HUG-PARTS C: Safety Cable Φ6.5x19x2mm Flat Washer (1pc) 3/16"(Φ5.2x8.4x1.
05 MOUNTING OPTIONS INSTALLING THE MOUNTING BRACKET 1 2 Standard Ceiling To Switch B A To Switch (HOT) (Neutral) (Ground) *Bare or Green A (No Neutral) (HOT)/ Switch (Ground) *Bare or Green CAUTION: To prevent electrical shock, ensure electricity has been turned off at the circuit breaker before beginning. Mount to the outlet box as shown above. If your outlet box is not mounted or if you do not have proper wiring in your outlet box, hire an electrician.
ATTACHING THE FAN BLADES 06 3 1. Insert blades in slots, aligning with motor assembly holes. 2. Secure blades with blade attachment screws & washers as shown. For Blade installation, use B parts: 3/16"x13mm Head Screws (10) Φ5x14x1.
07 HANGING THE FAN 5 MAKING THE ELECTRICAL CONNECTIONS 6 Outlet Box (Mounting Bracket Ground) Mounting Bracket (Mounting Bracket Ground) 1. Remove 1 opposing screw and loosen the other 2 for the mounting bracket. 2. Pass supply wires through mounting bracket. 3. Lift motor assemby and hang it on the hook on the mounting bracket using one of the screw holes. 4. Secure the safety cable to the building structure using a wood screw (C).
INSTALLING THE OPTIONAL WALL CONTROL 08 7 NOTE: Wall control not included. A Bluetooth wall control accessory can be purchased separately. NOTE: For multi-location wiring, skip to the next step. 1. Connect the green wire marked “GROUND” from the wall control to the copper wire from the wall outlet box that feeds back to the circuit breaker – important for proper fan function. 2.
09 HANGING THE FAN / INSTALLING THE ADAPTER PLATE 8 9 1. Secure wire connectors with supplied wire ties. Double-check the wire connections before finalizing hanging the fan. 2. Remove the motor from the hook on the mounting bracket. Slide the motor up to the mounting bracket and place the key hole on the motor over the screw on the mounting bracket. Turn motor until it locks in place at the narrow section of the key holes. 3.
INSTALLING THE LUMINAIRE MODULE & GLASS 10 10 1. 15 11 Connect white wire to white wire and blue wire to blue wire. 1. Remove 3 screws from the outer perimeter of the adapter plate. NOTE: Do not screw in luminaire plate until LED wires are connected. 2. Using the screws from the previous step, install the luminaire module.
11 FINISHING THE INSTALLATION 12 1. Install glass shade into the grooves without over-tightening.
CONTROLLING THE FAN 14 15 12 16 A A Summer Mode B B (Counter-Clockwise) C C Air-Gap Switch* Wall Control Remote Pairing Unpairing * Air-Gap Switch only included Control Press and hold buttons To purge, press and hold buttons for 4 seconds. with wall control for 10-15 seconds. Your fan was delivered to you with the included control already paired to your fan. You will need to remove the pull-tab to begin using your remote control.
12 CONTROLLING THE FAN Breeze Mode 1. Breeze Mode mimics the natural ebb and flow of winds in nature by varying the fan speed. NOTE: Breeze Mode always rotates your fan in the Summer (CCW) direction 2. To start Breeze Mode, press and for 4 seconds. The LED will blink green and the fan will beep. 3. To exit Breeze Mode and return to standard fan mode, press and for 4 seconds. The led will blink green and the fan will beep.
CONTROLLING THE FAN 12 17 Fan On/Off Light On/Off Fan Direction Press and hold button for 4 seconds. Press and hold button for 4 seconds. Press and hold button for 4 seconds. Fan On/Off: Press and hold button for 4 seconds. The LED on the remote will flash green and all connected fans will beep to indicate the message has been received. All fans will turn off. This will bring all fans controlled by the remote into sync. Light On/Off: Press and hold button for 4 seconds.
13 FACTORY RESET 18 19 20 WACFan_841812 Fan Wi-Fi Reset Factory Reset Receiver Factory Reset Press and hold the and for 10 seconds until LED blinks green and receiver emits 2 long beeps Press and hold buttons for 10 seconds Press the reset button on the receiver NOTE: If you change your Wi-Fi settings (SSID or Security Passphrase you will need to perform a Wi-Fi reset on the fan by holding down the fan speed up and fan speed down buttons on the remote control for 10 seconds.
APPLICATION 14 In addition to the included control, you can operate your fan by purchasing the WAC Smart Fans app.* Upgradeable with Smart Features Scan the code to the right with your phone to find out how you can enable smart features through the WAC Smart Fan app and integrate with your smart home ecosystem. NOTE: Press light toggle and season toggle and hold for 4 seconds if you prefer not using the app or broadcasting Wi-Fi. For more detailed app Instructions and Smart Home Device Integration 1.
14 APPLICATION 5. The WAC Smart Fan app will walk you through the main screen and show you how to create schedules, change fan speeds, dim the light, switch between Summer and Winter Modes, invite users, create groups and much more. Please refer to the WAC Smart Fan app instructions for more details. **Additional purchase required to enable app control and integration. **$9.
ACCESSORIES 15 Product Bluetooth Wall Control Bluetooth Remote Control Model Description Finish WC20 6 fan speeds, dims light to 1% Works in conjunction with WAC Smart Fan receiver (not included) WT RC20 Compatible with WAC Smart Fans 6 fan speeds, dims light to 1% WT 23
16 TROUBLESHOOTING My Fan Will Not Start 1. Check main and branch circuit fuses or circuit breakers. 2. Check line wire connections to fan and switch wire connections in the switch housings. WARNING: Make sure the main power is turned off! My Fan is Noisy 1. 2. 3. 4. 5. 6. 7. Allow for 24-hour break-in period. Most noises associated with a new fan will go away during this time period. Check to make sure the screws which attached to the blades (and blade arms when applicable) are tight.
TROUBLESHOOTING 16 My remote or wall control is not controlling my fan Verify that the fan is receiving power by power cycling the fan. To do this: 1. Cut power to the fan via standard On/Off wall switch, or the breaker if standard wall switch is not applicable. 2. Wait at least 10 seconds, and then restore power. 3. 4. 5. The fan will power on in Pairing mode for 3 minutes. Press and hold (ICON) and (ICON) buttons on wall control for 10-15 seconds.
16 TROUBLESHOOTING What is power cycling and how do I power cycle my fan? Power cycling is the act of temporaily removing the power source for your fan. If the fan is powered through a wall switch, turn the switch off for 10 seconds and back on. Alternately, you can use the circuit breaker the fan is connected to by toggling it off for 10 seconds and back on. If your fan is wired through a WAC wall control (P/N: WC20-WT) pull the Air-Gap Switch on your wall control, wait 10 seconds, and re-insert.
CERTIFICATE OF WARRANTY Congratulations on your new purchase. Felicidades por tu nueva compra. Your new WAC Smart Fan is engineered to make life easier every day. WAC creates future-forward fans and luminaires that provide energy savings and outstanding efficency. Our dedication to doing things the right way goes beyond our love for amazing products.
Félicitations pour votre nouvel achat. Votre nouveau ventilateur intelligent WAC est conçu pour vous simplifier la vie au quotidien. WAC crée des ventilateurs et des luminaires d’avant-garde qui permettent des économies d’énergie et une efficacité exceptionnelle. Notre engagement à bien faire les choses va au-delà de notre amour pour les produits étonnants.
F-036L & F -037L waclighting.
