Installation Guide
25F-060 / F-060L
24 25 26
WACFan_841812
Factory Reset
Press and hold buttons for 10 seconds
Receiver Factory Reset
Press the reset button on the receiver
until the receiver beeps
NOTE: If advised by technical support, you can reset your fan to factory settings by
either holding down the light toggle, fan toggle, and season button for 10 seconds or
briey depressing the reset button on the fan’s receiver. The fan will emit three beeps
indicating the reset was successful.
NOTE: Factory reset will remove remote control(s), wall control(s) and WAC
app connections.
NOTE: If you change your Wi-Fi settings
(SSID or Security Passphrase you will need
to perform a Wi-Fi reset on the fan by
holding down the fan speed up and fan
speed down buttons on the remote control
for 10 seconds. The light on the remote
will ash green and the fan will sound two
long beeps. You can then use the Modern
Forms Fans app to connect your fan to the
new network.
RESET 14
Fan Wi-Fi Reset
Press and hold the and for 10 seconds until LED
blinks green and receiver emits 2 long beeps