LOFT Installation Instructions works with the Google Assistant
Please read and review instructions before installation
GENERAL INQUIRIES FAN SUPPORT For all questions about your ceiling fan please read all included instructions, installation procedures, troubleshooting guidelines and warranty information before starting installation For fast service have the following information below when you call: For missing parts or general inquiries call our trained technical staff at: • • • 1-800-526-2588 1-800-526-2588 option 0 Model Name and Number Part Number and Part Description Date Of Purchase and Purchase Location op
SAFETY RULES For operation, maintenance, and troubleshooting information, visit http://waclighting.com/fan-support/ 1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker before beginning. 2. All wiring must be in accordance with the National Electrical Code “ANSI/ NFPA 70” and local electrical codes. Electrical installation should be performed by a licensed electrician. 3.
02 WARNING: Do not install or use your fan if any part(s) is/are damaged or missing. This product is designed for use only with the supplied parts and/or accessories designated for use with this product by WAC. Substitution of parts or accessories not designated for use with this product by WAC could result in personal injury or property damage and will void the warranty. Contact an authorized dealer or the manufacturer if any parts are damaged or missing.
GET SMART This WAC Smart Fan is: Wet location-listed to the strictest Coordinates with smart devices DC UL/cUL safety regulations for voice-activated control MOTOR Wi-Fi and Bluetooth enabled Compatible with our WAC app for unlimited control The WAC app synchronizes seamlessly with smart home devices you already own works with the Google Assistant APP DOWNLOAD Available for purchase on the Google Pay and App Store WALL CONTROL WC20-WT Optional accessory Sold separately 6 fan speeds Dims light to
TABLE OF CONTENTS 4 Package Contents 9. Mounting Options 10. Installing the Mounting Bracket 10. Attaching the Fan Blades 11. Hanging the Fan 12. Making the Electrical Connections 15. Installing the Optional Wall Control 16. Finishing the Installation 18. Installing the Adapter Plate 19. 11 Installing the Luminaire Module 20. 12 Controlling the Fan 21. 13 Reset 24. 14 App Instructions 25. 15 Accessories 26. 16 Troubleshooting 29.
03 TOOLS & MATERIALS REQUIRED Phillips screwdriver Step ladder Wire cutters Electrical tape NOTE: Before discarding packaging materials, be certain all parts have been removed. NOTE: Place the parts from the hardware bag into a small container to keep them from being lost. MAC ID IMPORTANT: Please make note of the MAC ID on the receiver and keep it in a safe place.
PACKAGE CONTENTS 04 3 Fan Blades 7 RPL-F094-38-BD-** Downrod Assembly 2 6 RPL-HGR-ASM-** 1 4 Mounting Bracket Blade Press Plates RPL-F094-BLDEPLATE RPL-HGR-ASM-** 5 Canopy Ring RPL-CAN-RND-** Coupling Cover RPL-F094COUCVR-** Motor Housing 8 Canopy RPL-CAN-RND-** Hardware Bag 11 13 Luminaire Module F4IN-120V-R1-30 10 Receiver F-R3-094-038 A: Junction Box Machine Screws (2) Spring Washers (2) 9 14 Adapter Plate/Housing RPL-F094-ADP-** 12 Remote Control RC20-WT RPL-F094-PARTS
05 MOUNTING OPTIONS INSTALLING THE MOUNTING BRACKET 1 2 Standard Ceiling To Switch Slope Ceiling To Switch A B (No Neutral) A Caution: Remember to disconnect the power at the circuit breaker. (Hot) (Neutral) (Ground) *Bare or Green (Hot)/ Switch (Ground) *Bare or Green CAUTION: To prevent electrical shock, ensure electricity 1. 10 Figure 1 is an example of how to mount the outlet box. If needed - mount the outlet box to the ceiling joist. using A Hardware 1.
ATTACHING THE FAN BLADES 06 3 1. Place blade and blade press plate on the motor assembly. Use B hardware. 2. Secure the blade and blade press plate with the mounting screws on to the motor housing. Repeat step for remaining blades. 3. Turn fan around and place on soft cloth to prevent scratches to the surface until you hang the fan on the hanger bracket.
07 HANGING THE FAN 1. 2. 3. 4. 5. 12 Remove the hanger ball portion from the downrod/ hanger ball assembly by loosening the set screw in the hanger ball until the ball falls freely down the downrod. Remove the pin from the downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation (Fig 4). Remove the hairpin clip and clevis pin from the bottom of the downrod. Retain the pin and clip for reinstallation (Fig. 5).
HANGING THE FAN 07 8 F-094L 13
07 HANGING THE FAN 9 MAKING THE ELECTRICAL CONNECTIONS 10 Outlet Box Secure the safety cable into the structure beams using the wood screw, washers, and spring washers provided. Use C hardware. NOTE: Safety cable is required for all ceiling fan installations in Canada. Safety cable is required for ceiling fan and light (combo) Connect the labled wires from fan to the corresponding wires on the receiver. 2. Connect the labeled wires from the outlet box to the corresponding wires on the receiver.
INSTALLING THE OPTIONAL WALL CONTROL 08 11 NOTE: Wall control not included. A Bluetooth wall control accessory can be purchased separately. NOTE: For multi-location wiring, skip to the next step. 1. Connect the green wire marked “GROUND” from the wall control to the copper wire from the wall outlet box that feeds back to the circuit breaker – important for proper fan function. 2.
08 INSTALLING THE OPTIONAL WALL CONTROL Wall Control 1 16 Wall Control 2 Wall Control 3 1. Install the wall control using the wiring diagram in above. 2. Individually pair each of the wall controls with the fan receiver using the pairing instructions in section 15.
INSTALLING THE CANOPY 09 12 Junction box 1. Secure wire connectors with supplied wire ties. 2. Install canopy to mounting bracket with the screw removed in section 2. 3. Install canopy screw ring as shown.
10 INSTALLING THE ADAPTER PLATE / LUMINAIRE MODULE 13 16 18 14 16 1. Remove 1 of 3 screws from the mounting ring and loosen the others (do not remove). 1. Remove 1 and loosen 2 screws from the outer perimeter of the adapter plate. 2. Twist lock the adapter plate into place. 2. Connect the LED wires 3. Tighten all 3 screws to secure the adapter plate.
INSTALLING THE LUMINAIRE MODULE/GLASS 11 15 1. 2. Twist lock the LED module/plate into place using they key lock method. Install the 1 previously removed screw and tighten the 2 others. F-094 L 16 1. 2. controlling your WAC Smart Fan. NOTE: There is no luminaire cover for this fan.
12 CONTROLLING THE FAN 17 18 19 A A B Summer Mode B (Counter-Clockwise) C Air-Gap Switch* Optional Wall Control C Remote Pairing Unpairing Control Press and hold buttons for 10-15 seconds. To purge, press and hold buttons for 4 seconds. * Air-Gap Switch only included with wall control Winter Mode (Clockwise) Your fan was delivered to you with the included remote already paired to your fan. You will need to remove the pull-tab to begin using your remote control.
CONTROLLING THE FAN Breeze Mode 1. Breeze Mode mimics the natural ebb and flow of winds in nature by varying the fan speed. NOTE: Breeze Mode always rotates your fan in the Summer (CCW) direction 2. and for 4 seconds. The To start Breeze Mode, press LED will blink green and the fan will beep. 3. To exit Breeze Mode and return to standard fan mode, press and for 4 seconds. The led will blink green and the fan will beep.
12 CONTROLLING THE FAN 20 Fan Direction Press and hold button for 4 seconds. Press and hold button for 4 seconds. Press and hold button for 4 seconds. Press and hold Press and hold to Fan Direction: Press and hold beep to indicate the message has been received. All fans will be set to summer mode (CCW rotation). This will bring all fans controlled by the remote into sync.
RESET 21 22 13 23 WACFan_841812 Fan Wi-Fi Reset Factory Reset Receiver Factory Reset Press and hold the and for 10 seconds until LED blinks green and receiver emits 2 long beeps Press and hold buttons for 10 seconds Press the reset button on the receiver until the receiver beeps NOTE: If you change your Wi-Fi settings (SSID or Security Passphrase you will need to perform a Wi-Fi reset on the fan by holding down the fan speed up and fan speed down buttons on the remote control for 10 seconds.
14 APPLICATION In addition to the included control, you can operate your fan with the WAC app. Upgradeable with Smart Features can enable smart features through the WAC app and integrate with your smart home ecosystem. NOTE: Press light toggle and season toggle and hold for 4 seconds if you prefer not using the app or broadcasting Wi-Fi. 24 1. To use the WAC app, download it from the App Store or Google Play. 2. Open the app to create your account.
APPLICATION 5. 14 The WAC app will walk you through the main screen and show you how to create schedules, change fan speeds, dim the light, switch between Summer and Winter Modes, invite users, create groups and much more. Please refer to the WAC app instructions for more details.
15 ACCESSORIES Product 26 Model Description Finish Bluetooth Remote Control RC20- Compatible with WAC Smart Fans 6 fan speeds, dims light to 1% WT Bluetooth Wall Control WC20- 6 fan speeds, dims light to 1% Works in conjunction with WAC Smart Fan receiver (not included) WT Coupler DC-** Connects two downrods Slope Ceiling Kit SC-** Designed to accommodate buildings with steeper sloped ceilings up to 45° or 12/12 pitch F-094L
ACCESSORIES Product Downrod F-094L Model 15 Description DR12-** 12” downrod DR18-** 18” downrod DR24-** 24” downrod DR36-** 36” downrod DR48-** 48” downrod DR60-** 60” downrod DR72-** 72” downrod All our downrods are .75” O.D.
16 TROUBLESHOOTING My Fan Will Not Start 1. Check main and branch circuit fuses or circuit breakers. 2. Check line wire connections to fan and switch wire connections in the switch housings. WARNING My Fan is Noisy 1. 2. 3. 4. 5. 6. 7. Allow for 24-hour break-in period. Most noises associated with a new fan will go away during this time period. Check to make sure the screws which attached to the blades (and blade arms when applicable) are tight. Check to make sure all screws in motor housing are snug.
TROUBLESHOOTING 16 My Fan is not producing Enough Air Movement If possible, please consider using a longer than included downrod. My remote or wall control is not controlling my fan Verify that the fan is receiving power by power cycling the fan. To do this: 1. Cut power to the fan via standard On/Off wall switch, or the breaker if standard wall switch is not applicable. 2. Wait at least 10 seconds, and then restore power. 3. The fan will power on in Pairing mode for 3 minutes. 4.
16 TROUBLESHOOTING What is power cycling and how do I power cycle my fan? is wired through a WAC wall control (P/N: WC20-WT) pull the Air-Gap Switch on your wall control, wait 10 seconds, and re-insert. What is Adaptive Learning? Adaptive learning is an exclusive feature that allows your fan to learn your daily/weekly habits and automatically recommend scheduled activity What is Breeze Mode? What is Pairing? Pairing is the process of connecting your WAC remote or wall control to your fan.
CERTIFICATE OF WARRANTY Congratulations on your new purchase. Your new WAC Smart Fan is engineered to make life easier every day. WAC creates futurededication to doing things the right way goes beyond our love for amazing products.
Félicitations pour votre nouvel achat. au quotidien. WAC crée des ventilateurs et des luminaires d’avant-garde qui permettent faire les choses va au-delà de notre amour pour les produits étonnants.
F-094L 33
F- 0 9 4 L waclighting.
