Installation Sheet
WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JUNE, 2014
INSTALLATION INSTRUCTION
1” LEDme Mini Recessed - New Construction
HR-LED231R, HR-LED232R, HR-271R, HR-272R
SAFETY INSTRUCTION
To reduce the risk of re, electrical shock and injuries to persons:
• Turn o power at main switch prior to installation.
• Use only with Class 2 Power supplies unit.
• Contact Manufacturer for LED replacement.
• Contact customer service ,better to use the recommended Class 2
power supplies unit.
MOUNTING AND WIRING:
1. Cut a 2 1/4” diameter hole on the ceiling.
2. Feed the xture wires through the hole, and connect to wires from
the Power Supply with connector.
3. Compress the springs on either side of the xture and insert into the
ceiling until the trim ring is ush to the ceiling.