Specification Sheet

Fixture Type:
Catalog Number:
Project:
Location:
WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Avenue • Ontario, CA 91760
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. NOV 2013
HRLED252E
1" LEDme® Downlight
2”
2w”
38”
5s”
min 15”
max 242”
FINISHES
BN GM WT
PRODUCT DESCRIPTION
Square adjustable recessed trim. IC-Rated housing included with trim,
can be used as new construction or remodel.
FEATURES
• 1" aperture
• Cutout: 22”
• 20° adjustment from vertical; home docking position
to ensure light is projected straight down when needed
• Less than z” thick, super low prole die-cast aluminum trim
• Sold as new construction, may be re-congured in the eld for remodel
• Narrow ood beam spread
• 100,000 hour rated life
• UL and CUL Listed
• 5 year WAC Lighting product warranty
SPECIFICATIONS
Construction: Die-cast aluminum trim and aluminum heat sink.
Housing and junction box are 20 gauge steel painted black.
Frame and hanger bars are heavy gauge galvanized steel.
J-Box: Seven knockouts and four Romex® style wiring connectors provided for
ease of installation. Rated for branch wiring.
Driver: Electronic driver, 120VAC/60Hz input, 4W max output.
Power factor >0.9. Dimming with thermal protection.
Light Source: Includes one 3W ANSI compliant Warm/Neutral LED
for the nest color consistency possible. Replacement modules available.
Dimming:
May be dimmed to 10% with electronic low voltage (ELV) dimmer.
Mounting: Supplied with hanger bars, adjustable from 15"-242"
to accommodate various joist constructions and grid sizes.
Hanger bars include a captive mounting "screw-nail" for ease of installation.
For remodel installation, three heavy gauge inner retention clips push
out onto ceiling or other mounting surface to rmly hold housing in place.
Accommodates surface up to 1" thick.
Minimum plenum height of 4" required. 22" cutout hole.
Finish: Available in White (WT) powder coat paint and electroplated
Brushed Nickel (BN) and Gun Metal (GM).
Rating: IC-Rated: Suitable for direct contact with insulation.
Standards: UL & CUL Listed.
ORDER NUMBER
Model # Color Temp Finish
HRLED252E 27
W
35
C
2700K
3000K
3500K
4500K
BN
GM
WT
Brushed Nickel
Gun Metal
White
REPLACEMENT MODULES
Model # Color Temp
RM1X327DL
RM1X330DL
RM1X335DL
RM1X345DL
2700K
3000K
3500K
4500K
HR-LED252E – –
Example: HRLED252E-C-GM
FIXTURE PERFORMANCE
Model # Color Temp Watt Lumens Ecacy CRI
HRLED252E27 2700K 4W 160 40.0 Lm/W 85
HRLED252EW 3000K 4W 160 40.0 Lm/W 85
HRLED252E35 3500K 4W 170 42.5 Lm/W 80
HRLED252EC 4500K 4W 201 50.3 Lm/W 75