Installation Sheet

ManualsBrandsWAC Lighting ManualsAll WAC LightingWAC Lighting 1 Light Down Lighting Mini Track Pendant for J Series Track Systems from the Felis Collection

05/21/07 Rev 1

INSTRUCTIONS: PLD Models

Pendant Shade Installation

CAUTION

• Always turn off power at main switch prior to installation to prevent electrical shock.

SINGLE PIECE SHADE:

All components screw clockwise to

tighten.

1. Make certain the Nord style

socket is screwed fully into the

aluminum cone.

2. Note the orientation of the black

threaded retaining ring in the

diagram.

3. Raise the shade to the level of

the Nord socket so that the

threaded portion protrudes

through the hole.

4. Place the leveling spring on top

of the retaining ring, and screw

on to the socket until the shade

is snug against the aluminum

cone.

LAMPING:

Single piece shades accept “A” or

“G” type lamps 100 Watt max.

NORD SOCKET

RETAINING RING

LEVELING SPRING

ALUMINUM CONE

Summary of content (1 pages)