Specification Sheet
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. DEC 2015
POWER SUPPLY ACCESSORIES
Wiring box with switch TBS
64” × 1s” × 14”
Use when spanning a large gap in a system layout
without leaving exposed wiring (ie: lighting kitchen
cabinets on both sides of a sink or window).
Low voltage wiring is collected inside box,
with Romex® wire output to go behind a wall.
Multiple Terminal Block
MTB08 8 outputs
4d” × 1s” × w”
Easily wire multiple output connections for a
neat installation without the use of open splices.
One power supply input and either 6 or 8 outputs.
5A capacity. Three mounting screws included.
12' Extension Cable
SL-EXT-144
Wire: 144"
Connector: 18"
Use to extend the distance between power supply
or wiring box (TB-S) to a LINE™ fi xture.
Wire Clip (10 Pack)
SL-WC-1
2" × a"
Use to tack power cords or joiner cables
neatly to a surface.
LINE™ 2.0 – model: LN-LED-P
LED Cabinet and Niche Lighting
CONNECTION ACCESSORIES
Joiner Cables
SL-IC-06
SL-IC-12
SL-IC-24
SL-IC-36
6”
12”
24”
36”
Connects two sections of LINE™.
Custom Cable Extenders
SL-IF
Øa" × 3s"
Two female ends.
Connects two joiner cables to create custom lengths.
4-way "X" connector
SL-X
Wires: 4" each
Connectors: 18" each
"X" connector has four male connectors and can
be used to easily customize your design layout.
3-way "Y" connector
SL-Y
Wires: 4" each
Connectors: 18" each
"Y" connector has three male connectors and can
be used to easily customize your design layout.
2
POWER SUPPLIES Input Output
Plug-in
Class 2 Transformer
EN2460PARS
EN24100PARS
120VAC
120VAC
24V/60W
24V/96W
2w” × 1s” × 1w”
4s” × 2” × 1s”
Cannot be dimmed. Includes 6' cord
and fi ve SL-WC-1 plastic wire clips.
Remote
Class 2 Transformer
EN2460RB2S
EN24100RB2S
120VAC
120VAC
24V/60W
24V/96W
62” × 1s” × 14”
May be dimmed. Includes 6' cord
and fi ve SL-WC-1 plastic wire clips.
Remote 277V
EN24100277RB2T 277VAC 24VDC / 96W
12s" x 34" x 2"
Includes a 6 foot lead wire