Installation Sheet

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. SEPTEMBER, 2014
INSTALLATION INSTRUCTION
Vibe - dwelLED™ LED Picture Lights
PL-LED15-27, PL-LED25-27, PL-LED37-27
5. FIXTURE ADJUSTMENT
To adjust xture head up and down Fig.3
• Loosen the two junction box screws (B1)
• Adjust xture head to ensure it is parallel to the ground
• Re-tighten junction box screws (B1)
To adjust xture head in and out Fig.4
• Loosen the two junction box screws (B1)
• Adjust the four corner xture adjust screws (H1) to ensure it is parallel to the wall.
Loosen the left two adjust screws and tighten the right two adjust screws, (or reverse) to make sure
the xture is parallel to the wall.
• Re-tighten junction box screws (B1)
6. Re-attach canopy (D1) and hanger accessory (G1) using screws (C1).
If hanger accessory is not needed, it can be removed.
Fig.3
Fig.4
B1
B1
Junction Box Screw
Junction Box Screw
Right Adjust
Screws
Left Adjust
Screws
Junction Box Screw
Unparallel to the wall Parallel to the wall
H1H1
B1