Instalation

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JUNE, 2016
INSTALLATION INSTRUCTION
Silo X20 - LED Monopoint
MO-2020
BEAM ANGLE ADJUSTMENT : Fig.3
1. Hold xture body with one hand and front cap with another.
2. Grip the front cap with two ngers and rotate it gently clockwise or counter clockwise until desired beam angle is achieved.
3. Cease rotation when you feel resistance as beam angle is reaching its minimum or maximum
ACCESSORIES:
1. With xture powered o and front cap facing toward you, rotate the front cap clockwise just passed the position you feel a “click” (Fig. 4)
2. Gently, while holding xture body secure, rock front cap assembly back and forth while pulling it away from xture body to remove
front cap assembly (Fig. 5)
Fixture Body
Counter Clockwise
Increase beam angle
Clockwise
Decrease beam angle
Rotate clockwise
Beam angle
adjustment
Front Cap
Fig.4
Fig.3
Fig.5
Front cap assembly