Specifications

SPECIFICATION SHEET
SINGLE CIRCUIT “L” TRACK ACCESSORIES
2 Wire Flexible Connector Model LFLX
Description: Connects two “LT” tracks at variable angles, from 60˚
to 180˚. Used to make the transition from wall to ceiling, and is a
power entry point. Accepts wires from above the ceiling, with knock
out for trade size connector.
Finish: Available in White or Black.
Listing: UL & CUL Listed, New York City Approved.
Dimensions: 11”L
2 Wire “L” Connector Model LL
Description: Connects two “LT” tracks at a 90˚ angle, and is a
power entry point. Accepts wires from above the ceiling, with knock
out for trade size connector.
Finish: Available in White or Black.
Listing: UL & CUL Listed, New York City Approved.
Dimensions: 2 3/4" x 2 3/4"
2 Wire “T” Connector Model LT
Description: Connects three “LT” tracks at 90˚ angles, and is a
power entry point. Accepts wires from above the ceiling, with knock
out for trade size connector.
Finish: Available in White or Black.
Listing: UL & CUL Listed, New York City Approved.
Dimensions: 4” x 2 3/4"
2 Wire “X” Connector Model LX
Description: Connects four “LT” tracks at 90˚ angles, and is a power
entry point. Accepts wires from above the ceiling, with knock out for
trade size connector.
Finish: Available in White or Black.
Listing: UL & CUL Listed, New York City Approved.
Dimensions: 4 1/8” x 4 1/8”
W.A.C. reserves the right to change details that do not affect overall function and performance.
8 1/2"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
REV 07/29/04