Specifications

ManualsBrandsWAC Lighting ManualsCeiling LightsSummit Beamshift Track Head

WAC Lighting

www.waclighting.com

Phone (800) 526.2588 • Fax (800) 526.2585

Headquarters/Eastern Distribution Center

44 Harbor Park Drive • Port Washington, NY 11050

Phone (516) 515.5000 • Fax (516) 515.5050

Western Distribution Center

1750 Archibald Ave • Ontario, CA 91761

Phone (800) 526.2588 • Fax (800) 526.2585

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. SEPTEMBER, 2014 1

INSTALLATION INSTRUCTION

LED201/202/207/208 - AC LED Track Luminaires

H/L/J-LED201, H/L/J-LED202, H/L/J-LED207, H/L/J-LED208

WARNING

IMPORTANT: NEVER attempt any work without shutting o the electricity.

- Read all instructions before installing.

- System is intended for installation by a qualied electrician in accordance with the National Electrical Code and

local regulations.

- Place the wall switch in the “OFF” position.

- Go to the main fuse box, or circuit breaker. Place the main power switch in the “OFF” position and unscrew the fuse(s)

or switch “OFF” the circuit breaker switch(es) that control the power to the xture or room that you are working on.

AVERTISSEMENT

IMPORTANT : Coupez l’électricité avant TOUTE manipulation.

- Lisez toutes les instructions avant d’installer.

- Système est destiné à être installé par un électricien qualié en conformité avec le code national de l’électricité et

les règlements locaux.

- Placez l’interrupteur mural en position d’arrêt (« OFF »).

- Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur principal en

position d’arrêt (« OFF »).

OVERVIEW:

Fixtures are designed for use on WAC Lighting’s track systems.

LED TRACK FIXTURE TRACK SYSTEMS

H-LED201, H-LED202, H-LED207 and H-LED208 Series H Track

L-LED201, L-LED202, L-LED207 and L-LED208 Series L Track

J-LED201, J-LED202, J-LED207 and J-LED208 Series J and J2 Track

Note: All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts out, or use any parts that

are worn out or broken. Failure to follow this instruction could invalidate the ETL/CETL listing of this xture.

LED202LED201 LED207 LED208

Summary of content (3 pages)

PAGE 1
INSTALLATION INSTRUCTION LED201/202/207/208 - AC LED Track Luminaires H/L/J-LED201, H/L/J-LED202, H/L/J-LED207, H/L/J-LED208 WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. - Read all instructions before installing. - System is intended for installation by a qualified electrician in accordance with the National Electrical Code and local regulations. - Place the wall switch in the “OFF” position. - Go to the main fuse box, or circuit breaker.
PAGE 2
INSTALLATION INSTRUCTION LED201 - AC LED Track Luminaires H/L/J-LED201, H/L/J-LED202, H/L/J-LED207, H/L/J-LED208 FIXTURE INSTALLATION: 1. The track has a groove running its length to indicate polarity and the locking tab has an arrow indicating locking direction. 2. Insert adapter into track slot. The arrow should point to the grooved side of the track. 3. Push up and rotate the adapter into the lock position. 4. Reverse procedure to remove. The fixture may be positioned anywhere along the track.
PAGE 3
INSTALLATION INSTRUCTION LED201 - AC LED Track Luminaires H/L/J-LED201, H/L/J-LED202, H/L/J-LED207, H/L/J-LED208 ACCESSORIES (Order separately): The fixtures can accommodate colored glasses as accessories. The colored glasses can be installed in two ways depending on the desired beam angle. 1. 2. 3. 4. Remove the front baffle with a proper tool. In order to get the flood beam angle in color; place the lens, spacer and colored glass into the fixture consecutively.