Instructions / Assembly

2WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. 10/09/15
waclighting.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
PREPARATION
1. Shut o the power at the circuit breaker and remove existing xture, including the crossbar.
2. Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
CONNECTING THE WIRE (FIG. 2)
3. Remove the mounting screw (C) from the xture and take out the mounting plate.
4. Connect the driver (D) input wires with junction box wires as shown in Fig.2, making sure that all wire connectors (A) are secured. If your
outlet box has a green or bare copper ground wire, connect the xture’s ground wire to it. Otherwise, connect the xture’s ground wire
directly to the mounting plate using the green screw provided. After wires are connected, tuck them carefully inside the junction box.
COMPLETING THE INSTALLATION (FIG. 1)
5. Secure the mounting plate to the junction box using junction box screws (B), Make sure the junction box is horizontal as shown in Fig. 1.
The side of the mounting plate marked “GND” must face out
6. Plug the male end connector into the female end connector.
7. Place the xture over the back plate and secure it with mounting screws (C).
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig. 2
INSTALLATION INSTRUCTION
698 - LED Vanities
WS-69815/WS-69826/WS-69838
Fig. 1
Mounting Screw
Fixture
Driver 2 7/8”[L]x 1 3/8”[W]x 1/8”[H]
Driver 2 7/8”[L]x
1 3/8”[W]x 1/8”[H]
Junction Box Screw
Junction Box Screw
Female/Male End Connector
Female/Male End Connector
Wire Connector
Wire Connector
Mounting Screw
Mounting Plate
Junction Box
Junction Box
Fixture
WS-69815 4 1/8”
WS-69815 7MBC101013
WS-69815 4”
WS-69826 4 1/8”
WS-69826 7MBC101021
WS-69826 4 1/8”
WS-69838 4 1/8”
WS-69838 7MBC151106
WS-69838 5 3/8”
1 3/8”
1 3/4”
Ground Wire
Ground Wire
Mounting Plate
C
D
D
B
B
A
A
C
G0