Installation Sheet

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. MAY, 2015 1
INSTALLATION INSTRUCTION
Exterminator II LED Track Luminaires
WTK-1014/1035/1052, WHK-1035/1052
WARNING
IMPORTANT: NEVER attempt any work without shutting off the electricity.
- Read all instructions before installing.
- System is intended for installation by a qualified electrician in accordance with the National Electrical Code and local
regulations.
- Go to the main fuse box, or circuit breaker. Place the main power switch in the “OFF” position and unscrew the fuse(s) or
switch ”OFF” the circuit breaker switch(es) that control the power to the fixture or room that you are working on.
- Place the wall switch in the “OFF” position.
AVERTISSEMENT
IMPORTANT : Coupez l’électricité avant TOUTE manipulation.
- Lisez toutes les instructions avant d’installer.
- Système est destiné à être installé par un électricien qualifié en conformité avec le code national de l’électricité et les
règlements locaux.
- Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur principal en
position d’arrêt (« OFF »).
- Placez l’interrupteur mural en position d’arrêt (« OFF »).
Overview:
Fixtures are designed for use on WAC Lighting’s track systems. They may also be used on other manufacturer’s brand of track
(consult factory for compatibility).
LED TRACK LUMINAIRE TRACK SYSTEM
WTK-1014/WTK-1035/WTK-1052 Series WTK 120V W Track
WHK-1035/WHK-1052 Series WHK 277V W Track
Installing on Track
1. Turn the lock switch to the unlock position. Turn the circuit selecting handle to the power off position. (Fig 1)
2. Make sure the convexity on the adaptor box is at the same side with the slot on the track (Fig 2).
Fit the adaptor box into the track. Ensure the convexity on the adaptor box is at the same side with the slot on the track.
W Track
Switch handle
(power off position)
Lock switch
(unlock position)
Adapter
Slot
Convexity
Fig 2
Fig 1