Installation Sheet

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. MAY, 2015 2
INSTALLATION INSTRUCTION
Exterminator II LED Track Luminaires
WTK-1014/1035/1052, WHK-1035/1052
Installing on Track (Continue)
3. Turn the lock switch to the lock position. Turn the circuit selecting handle to 1 or 2 to switch the power on.
Fig 3
2
1
Circuit selecting handle
1. Power on at circuit 1
2. Power on at circuit 2
Lock switch
(lock position)
360°
±90°
View A
View A
FIXTURE POSITIONING:
4. Rotate the luminaire’s body horizontally or vertically to aim it properly.
The fixture can rotate ±90°vertically and 360 °horizontally.
ACCESSORIES (Fig.5)
1. Use a screw-driver loosen the two screws at the back of the fixture body.
2. Take out the front frame, then change the lens.
3. To install cross louver or snoot, use the clips around the front frame to fasten them directly.
Snoot
Screw
Lens
Front Frame
Cross Louver
Fig.5
Fig.4