Specifications

Fixture Type:
Catalog Number:
Project:
Location:
2.5" Low Voltage
Remodel Non-IC Housing Non-IC
Model & Product
HR-801 2.5in Low Voltage Remodel Non-IC Housing
Example: HR-801
DESCRIPTION
Superb performance delivered in a small package. The 2.5" Low Voltage
Recessed Downlight series offers smooth and crisp light for under cabinet
and tight recessed spaces where miniature apertures are desired. May be
used with any WAC compatible 2.5" HR-837, HR-834, or HR-836 trims.
FEATURES
• Integral Electronic Transformer
• Advanced auto-reset, soft start and short circuit protection
• 3" clearance on all sides when insulation is present
• Suitable for chain wiring
• J-box and transformer accessible through ceiling opening
• Transformer included
• 5 year warranty
SPECIFICATIONS
Construction: 20 gauge steel
Power: 50W
Input: 120 VAC, 50/60Hz
Dimming: ELV: 100-10%
Light Source:
Halogen MR16 ( Sold Separately )
Mounting:
No screws, nails or hardware required. Flat
“wing” springs expand against the cut out hole
to hold fixture against the surface
Cut Out: 3"
Ceiling Thickness: 3/4"
Operating Temp: -4°F to 104°F (-20°C to 40°C)
Standards: UL, cUL, Damp Location Listed, Non IC
LINE DRAWING
waclighting.com | Phone [phone] | Fax [phone] | Headquarters/Eastern Distribution Center 44 Harbor Park Drive Port Washington, NY 11050
4
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. June 2019
❍