Datasheet

ETHSWG5C - eng Alle Angaben ohne Gewähr, Irrtümer und Änderungen vorbehalten. © Wachendorff Prozesstechnik GmbH & Co. KG 23.10.2018 -1-
Ethernet Switch, 5 Ports, Gigabit -
•5x 10/100/1000BaseT(X)
•Unmanaged / Plug and Play
•IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
•IEEE 802.1p: CoS, 4 Queues per Port
•Supports Jumbo Frames up to 9000 Byte
•Broadcast- and Multicast- Flooding Storm Control
•Redundant voltage Input / fault Signal relay
•Operatingtemperature -40 °C to +75 °C
•Protection class IP30
https://www.wachendorff-prozesstechnik.de/ETHSWG5C-eng
Beschreibung
The ETHSWG5C is a very compact and robust Industrial Ethernet
switch with 5x 10/100/1000BaseT (X). In addition to IEEE 802.3,
IEEE802.3u, IEEE 802.3ab and IEEE802.3x, it also supports CoS
according to IEEE 802.1p. For this purpose, 4 queues (priority classes)
are available per port. The compact, IP30 rated enclosure is designed
for use in harsh and demanding industrial environments where large
temperature differences and physical stress are known.
The ETHSWG5C is an unmanaged and plug and play capable switch
with a non-blocking/wirespeed Layer 2 switching engine. The Store and
Forward mode of operation ensures secure transmission. The
switchable Flooding Storm Control function protects against unwanted
assignment of the available transmission rate by broadcast or multicast
data frames.
The switch has a redundant voltage input and a fault signal relay for
signalling an error. In this way, failure of a power supply unit or the
power supply can guarantee trouble-free operation and direct fault
detection.
Produkt-Details
Operation:Store and Forward
Switching engine:wire-speed / non-blocking
Ethernet Standards:•IEEE 802.3 (10BaseT)
•IEEE 802.3u (100BaseTX)
•IEEE 802.3ab (1000BaseTX)
•IEEE 802.1p (CoS)
•IEEE 802.3x (Full Duplex) and
Back-Pressure (Half Duplex)
•Jumbo Frames 9K
RJ45 - Ports:5x 10/100/1000BaseT(X)
RJ45 - Speed:Auto-Negotiation (10/100/1000 Mbit/s)
RJ45 - Duplex:Half- or Full-Duplex
RJ45 - Connection:MDI/MDIX Auto-Crossover
Fault contact:Störmelde-Relais für Erfassung
Spannungsversorgung
DIP-Switch:1x Flooding Storm Control
1x Power Alarm (Störmeldekontakt)
MAC table size:2K
Indication:1x Alarm:
ALM - Ausfall Spannungsversorgung
2x Power Status:
P1, P2 - Status Spannungsversorgung
5x Ethernet port status: Link & Speed
Power supply:Redundant voltage input
Voltage range:12 to 58 VDC
Power consumption:55 mA at 48V, 25°C, full-load
Operating temperature:-40 °C to +75 °C (cold start at -40°C)
Storage temperature:-40 °C to +85 °C
Humidity:5 % to 95 % rF (non-condensing)
FCC/EMI:FCC Part 15
CISPR 22 (EN55022), Class A
Vibration:IEC60068-2-6
Schock:IEC60068-2-27
Drop:IEC60068-2-32
CE (EMS):IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
IEC61000-4-5
IEC61000-4-6
(Level 3)
RoHS und WEEE:conform
Protection classIP30
Housing:robust metalhousing
Dimension (WxHxD):29,1 mm x 109,2 mm x 89,4 mm
Weight:330 Gramm
Montage:DIN-Rail and Wall-mount
Manufacturer:Wachendorff Prozesstechnik GmbH &
Co. KG, Germany
Bestell-Nr. Produkt(e)
ETHSWG5C5-fach Ethernet Switch, Gigabit,
unmanaged