User manual

ManualsBrandsWACHENDORFF ManualsRemote MaintenanceGateway Modbus, LAN, RS-232, RS-485 24 Vdc

Industrial Electronic Devices

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

User Manual

Modbus TCP Client

to Modbus RTU

Slav

Document code: MN67510_ENG Revision 1.000 Page 1 of 14

INDEX:

Page

UPDATED DOCUMENTATION 2

REVISION LIST 2

WARNING 2

TRADEMARKS 2

INDEX 3

WARRANTIES AND TECHNICAL SUPPORT 4

User Manual

Revision 1.000

English

Gateway / Bridge

Modbus TCP Client to Modbus RTU Slave

to connect a Modbus TCP Server

(Order Code: HD67510 – HD67510M)

for Website information:

www.adfweb.com?Product=HD67510

for Price information:

www.adfweb.com?Price=HD67510

Benefits and Main Features:

Very easy to configure

Low Cost

Rail mountable

Wide supply input range

Opto-isolation for RS485

Industrial temperature range:

-30°C / 70 °C (-22°F / 158°F)

For others Gateways / Bridges:

Modbus RTU Master / Slave

Summary of content (14 pages)

PAGE 1
User Manual Modbus TCP Client to Modbus RTU Slave Document code: MN67510_ENG Revision 1.000 Page 1 of 14 Industrial Electronic Devices User Manual Revision 1.000 English Gateway / Bridge Modbus TCP Client to Modbus RTU Slave to connect a Modbus TCP Server (Order Code: HD67510 – HD67510M) for Website information: www.adfweb.com?Product=HD67510 for Price information: www.adfweb.
PAGE 2
User Manual Modbus TCP Client to Modbus RTU Slave Document code: MN67510_ENG Revision 1.
PAGE 3
User Manual Modbus TCP Client to Modbus RTU Slave Document code: MN67510_ENG Revision 1.000 Page 3 of 14 Industrial Electronic Devices CONNECTION SCHEME: Figure 1: Connection scheme for HD67510 ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.
PAGE 4
User Manual Modbus TCP Client to Modbus RTU Slave Document code: MN67510_ENG Revision 1.000 Page 4 of 14 Industrial Electronic Devices Figure 2: Connection scheme for HD67510M ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.
PAGE 5
User Manual Modbus TCP Client to Modbus RTU Slave Document code: MN67510_ENG Revision 1.000 Page 5 of 14 Industrial Electronic Devices CHARACTERISTICS: The Modbus TCP to Modbus RTU Gateway allows the following characteristics: Power supply 12-24 VAC/DC (3 VA); Opto-isolation for RS485 ; RS232 ; Mountable on Rail DIN ; Temperature range -30°C to 70°C.
PAGE 6
User Manual Modbus TCP Client to Modbus RTU Slave Document code: MN67510_ENG Revision 1.000 Page 6 of 14 Industrial Electronic Devices NEW PROJECT / OPEN PROJECT: The “New Project” button creates the folder which contains the entire device configuration. A device configuration can also be imported and exported: To clone the configurations of the Gateway in order to configure another Gateway device in the same manner, it is necessary to maintain the folder and all its contents.
PAGE 7
User Manual Modbus TCP Client to Modbus RTU Slave Document code: MN67510_ENG Revision 1.000 Page 7 of 14 Industrial Electronic Devices GENERAL PARAMETER: This section defines the fundamental communication parameters of two buses, Modbus TCP and Modbus RTU. By pressing the “General parameter” button from the main window for SW67510 (Fig. 3) the window “General Parameter” appears (Fig. 4). This window is divided in two sections, one for the Modbus TCP and the other for the Modbus RTU.
PAGE 8
User Manual Modbus TCP Client to Modbus RTU Slave Document code: MN67510_ENG Revision 1.000 Page 8 of 14 Industrial Electronic Devices TRANSLATE TABLE: By pressing the “Translate Table” button from the main window for SW67510 (Fig. 3) the window “Set Translate Table” appears (Fig.
PAGE 9
User Manual Modbus TCP Client to Modbus RTU Slave Document code: MN67510_ENG Revision 1.000 Page 9 of 14 Industrial Electronic Devices Example 1: If you want, from RTU network, read a data in the TCP network on the device at: Address 192.168.2.145; Through Gateway WORD 151 (Address TCP); Address RTU 101.
PAGE 10
User Manual Modbus TCP Client to Modbus RTU Slave Document code: MN67510_ENG Revision 1.000 Page 10 of 14 Industrial Electronic Devices UPDATE DEVICE VIA TCP: Section “Update Via TCP” (Fig.
PAGE 11
User Manual Modbus TCP Client to Modbus RTU Slave Document code: MN67510_ENG Revision 1.000 Page 11 of 14 Industrial Electronic Devices UPDATE DEVICE VIA SERIAL: Section “Update Via Serial” (Fig. 8): In order to load the parameters or update the firmware in the gateway, follow these instructions: Turn off the device; Connect the Null Modem cable from your PC to the gateway; Insert the Boot Jumper (see the Fig. 1 for more info); Turn on the device; Check the “Boot Led”.
PAGE 12
User Manual Modbus TCP Client to Modbus RTU Slave Document code: MN67510_ENG Revision 1.000 Page 12 of 14 Industrial Electronic Devices CHARACTERISTICS OF THE CABLES: Ethernet cable: The connection at Ethernet socket must be made with a Ethernet cable with a RJ45 plug. RS232 cable: The connection from RS232 socket to a serial port (example one from a personal computer), must be made with a NULL MODEM cable (a serial cable where the pins 2 and 3 are crossed).
PAGE 13
User Manual Modbus TCP Client to Modbus RTU Slave Document code: MN67510_ENG Revision 1.
PAGE 14
User Manual Modbus TCP Client to Modbus RTU Slave Document code: MN67510_ENG Revision 1.000 Page 14 of 14 Industrial Electronic Devices WARRANTIES AND TECHNICAL SUPPORT: For fast and easy technical support for your ADFweb.com SRL products, consult our internet support at www.adfweb.com. Otherwise contact us at the address support@adfweb.