User manual

ManualsBrandsWACHENDORFF ManualsRemote MaintenanceGateway Profibus, RS-232, RS-485 24 Vdc

Industrial Electronic Devices

ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31

Document

code: MN67561_ENG Revision 1

001

Page

User Manual

ProfiBus Slave to

Serial Communication

Master

User Manual

Revision 1.001

English

Gateway

ProfiBus Slave to Serial

Communication Master

(Order Code: HD67561)

for Website information:

www.adfweb.com?Product=HD67561

for Price information:

www.adfweb.com?Price=HD67561

Benefits and Main Features:

Very easy to configure

Low cost

Industrial temperature range:

-30°C / 70°C (-22°F / 158°F)

For others Gateways / Bridges:

CANopen to Modbus

Summary of content (12 pages)

PAGE 1
User Manual ProfiBus Slave to Serial Communication Master Document code: MN67561_ENG Revision 1.001 Page 1 of 12 Industrial Electronic Devices For others Gateways / Bridges: User Manual Revision 1.001 English Gateway ProfiBus Slave to Serial Communication Master (Order Code: HD67561) for Website information: www.adfweb.com?Product=HD67561 for Price information: www.adfweb.com?Price=HD67561 CANopen to Modbus See also the following links: www.adfweb.com?Product=HD67001 www.adfweb.
PAGE 2
User Manual ProfiBus Slave to Serial Communication Master Document code: MN67561_ENG Revision 1.
PAGE 3
User Manual ProfiBus Slave to Serial Communication Master Document code: MN67561_ENG Revision 1.001 Page 3 of 12 Industrial Electronic Devices CONNECTION SCHEME: Figure 1: Connection scheme for HD67561 ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.
PAGE 4
User Manual ProfiBus Slave to Serial Communication Master Document code: MN67561_ENG Revision 1.001 Page 4 of 12 Industrial Electronic Devices CHARACTERISTICS: The Configurable ProfiBus Slave to Serial Communication Master Gateway allow the following: Baud Rate and Parity changeable with software; Mountable on Rail DIN; Power Supply 12/18V AC, 4 VA o 12/24V DC; Temperature range -30°C to 70°C. Serials Protocols supported: o Simple ASCII Protocol; o Simple Binary Protocol; o Modbus; o JBUS.
PAGE 5
User Manual ProfiBus Slave to Serial Communication Master Document code: MN67561_ENG Revision 1.001 Page 5 of 12 Industrial Electronic Devices NEW PROJECT / OPEN PROJECT: The “New Project” button creates the folder which contains the entire device configuration.
PAGE 6
User Manual ProfiBus Slave to Serial Communication Master Document code: MN67561_ENG Revision 1.001 Page 6 of 12 Industrial Electronic Devices SET COMMUNICATION: This section define the fundamental communication parameter of two Buses, Serial and ProfiBus. By Pressing the "Set Communication" button from the main wndow for SW67561 (Fig. 2) the window "Set Communication" appears (Fig. 3). The Window is divided in two section, one for the ProfiBus and the other for the Serial.
PAGE 7
User Manual ProfiBus Slave to Serial Communication Master Document code: MN67561_ENG Revision 1.001 Page 7 of 12 Industrial Electronic Devices SET ACCESS: By pressing the “Set Access” button from the main window for SW67561 (Fig. 2) the window “Set SDO Access” appears (Fig. 4): It is divided in two part, the "ProfiBus IN --> Serial Read" and the "Serial Write --> ProfiBus OUT". The first part ("ProfiBus IN --> Serial Read") is used to read the data that arrived from the Slave ProfiBus.
PAGE 8
User Manual ProfiBus Slave to Serial Communication Master Document code: MN67561_ENG Revision 1.
PAGE 9
User Manual ProfiBus Slave to Serial Communication Master Document code: MN67561_ENG Revision 1.001 Page 9 of 12 Industrial Electronic Devices UPDATE DEVICE: Section “Update device” (Fig. 6): In order to load the parameters or update the firmware in the gateway, follow these instructions: Turn off the Device. Connect the Null Modem Cable Form your PC to the Gateway. Insert the Boot Jumper (see the Fig. 1 for more info). Select COM port and press the “Connect” Button.
PAGE 10
User Manual ProfiBus Slave to Serial Communication Master Document code: MN67561_ENG Revision 1.001 Page 10 of 12 Industrial Electronic Devices CHARACTERISTICS OF THE CABLES: The connection from RS232 socket to a serial port (example one from a personal computer), must be made with a Null Modem cable (a serial cable where the pins 2 and 3 are crossed). It is recommended that the RS232C Cable not exceed 15 meters. MECHANICAL DIMENSIONS: Figure 7: Mechanical dimensions scheme ADFweb.
PAGE 11
User Manual ProfiBus Slave to Serial Communication Master Document code: MN67561_ENG Revision 1.
PAGE 12
User Manual ProfiBus Slave to Serial Communication Master Document code: MN67561_ENG Revision 1.001 Page 12 of 12 Industrial Electronic Devices WARRANTIES AND TECHNICAL SUPPORT: For fast and easy technical support for your ADFweb.com SRL products, consult our internet support at www.adfweb.com. Otherwise contact us at the address support@adfweb.