User manual

76 UA964801 - User manual User manual - UA964801 77
11 Table of conguration parameters
The following table includes all parameters. Some of them will not be visible on
the models which are not provided with relevant Hardware data.
11.1 Analogue input
Parameters to congure the analogue input.
 Sensor type
Analogue input conguration/sensor selection
Thermocouple K (
Default ) -260 °C to 1360 °C
Thermocouple S -40 °C to 1760 °C
Thermocouple R -40 °C to 1760 °C
Thermocouple J -200 °C to 1200 °C
Thermocouple T -260 °C to 400 °C
Thermocouple E -260 °C to 1000 °C
Thermocouple N -260 °C to 1280 °C
Thermocouple B +80 °C to 1820 °C
Pt100 -200 °C to 600 °C
Ni100 -60 °C to 180 °C
NTC 10kOhm -40 °C to 125 °C
PTC 1kOhm -50 °C to 150 °C
Pt500 -100 °C to 600 °C
Pt1000 -100 °C to 600 °C
0 to 10 V
0 to 20 mA
4 to 20 mA
0 to 60 mV
Pot. max. 6 kOhm
Pot. max. 150 kOhm
 Decimal Point
Selects type of the visualized decimal point
0 No decimals.
Default
0.0 1 Decimal
0.00 2 Decimals
0.000 3 Decimals
 Measure unit
Selects the visualized measure unit
°C (
Default )
°F
K
V
mV
A
mA
Bar
mBar
psi
Pa
mm
cm
dm
m
km
in
g
kg
q
t
oz
lb
m/s
m/m
m/h
l/s
l/m
l/h
m
3
/s
m
3
/m
m
3
/h
rpm
%rh
ph
 Lower limit V/I
Range AN1 lower limit only for linear input. Ex: with input 4 to 20 mA this
parameter takes value associated to 4 mA
-32767 to +32767 [Digit
2
], Default : 0.
 Upper limit V/I
Range AN1 upper limit only for linear input. Ex: with input 4 to 20 mA this
parameter takes value associated to 20 mA
-32767 to +32767 [Digit
2
], Default : 1000.