User manual

36 UR3274U - User manual
.. Master Mode Remote process
To enable this function it is necessary to select r. p r o . on para-
meter 59
mast . In this mode the process value on UR3274U is a
value read via serial communication. The ID of the slave must
be same as value selected on parameter 57
sL. a d . and the
word to read is selected on parameter 60
add.r . Two successi-
ve pollings will be delayed for the time selected on parameter
57
se. de. The read value might be rescaled according to the
proportion described in the following table:
mast.
Limits of read value Limits of rescaled value
Min Max Min Max
r. p r o .
Read
Process
Lo . L. r.
Lower
Limit Re-
transmis-
sion
up.L.r.
Upper
Limit Re-
transmis-
sion
Lo .L.i .
Lower Limit
Input
u p. L.i .
Upper Limit
Input
 Conguration
. Modify Conguration Parameter
For conguration parameters see paragraph 11.
Press Eect Do

FNC
for  sec.
Display  shows 0000
with the st digit
ashing, while display
 shows
pass .

or
Change the ashing
digit and move to the
next one using the
SET
key.
Enter password 1234