User manual

UR3274U - User manual 51
 mast. Master
select master mode.
di s . Disable > Default
w. pro Write Process
r.w.co. Read Write Command Setpoint
w.ou.p. Write Output Percentage
r.w.a.1 Read Write Alarm 1 Setpoint
r. p r o . Read Process

add.r. Address Retransmission
select address for retransmission.
x – xFFFF hexadecimal > Default: 0x03E9.

Lo . L. r. Lower Limit Retransmission
lower limit retransmission range.
- -  [digit

], (degrees for temperature sensors) >
Default: 0.

up.L.r. Upper Limit Retransmission
upper limit retransmission range.
- –  [digit

], (degrees for temperature sensors) >
Default: 0.

t m r. f. Timer Function
enable 1 or 2 Timers which may be set from user menu and
which can be related to alarms.
di s . Disable > Default
s.tm.s. Single Timer Seconds
d.tm.s. Double Timer Seconds
d.s.t.s. Double Sequential Timer Seconds

The display of decimal point depends on the setting of parameter sen.
and the parameter d. p.

If parameter 61 Lo . L. r. and 62 u p .L. r. have the same value, retransmitted
value is not rescaled.