User manual

34 - UR4848 - User manual UR4848 - User manual - 35
10 Table of Conguration Parameters
The following table includes all parameters. Some of them will not be visible on
the models which are not provided with relevant Hardware data.
1 C.out Command Output:
Command output type selection.
c. o1 Default (necessary for using process and setpoint retransmission
function with Volt / mA output)
c. o2
c.SSr
c.uAL.
c.4.20
c.0.20
c.0.10
UR484802
COMMAND ALARM 1
c. o1
Q1 Q2
c. o2
Q2 Q1
c.SSr
SSR Q1
c.uAL.
Q1 (opens) / Q2 (closes) -
c.4.20
4 ... 20 mA Q1
c.0.20
0 ... 20 mA Q1
c.0.10
0 ... 10 mV Q1
UR484803
COMMAND ALARM 1 ALARM 2
c. o1
Q1 Q2 SSR
c. o2
Q2 Q1 SSR
c.SSr
SSR Q1 Q2
c.uAL.
Q1 (opens) / Q2 (closes) SSR -
c.4.20
4 ... 20 mA Q1 Q2
c.0.20
0 ... 20 mA Q1 Q2
c.0.10
0 ... 10 mV Q1 Q2
UR484804
COMMAND ALARM 1 ALARM 2 ALARM 3
c. o1
Q1 Q2 Q3 SSR
c. o2
Q2 Q1 SSR SSR
c.SSr
SSR Q1 Q2 Q3
c.uAL.
Q1 (opens) / Q2 (closes) Q1 SSR -
c.4.20
4 ... 20 mA Q1 Q2 Q3
c.0.20
0 ... 20 mA Q1 Q2 Q3
c.0.10
0 ... 10 mV Q1 Q2 Q3
2 SEN. Sensor
Analogue input conguration/sensor selection
Tc.K Tc-K (Default) -260 °C ... 1360 °C
Tc.s Tc-S -40 °C ... 1760 °C
Tc.r Tc-R -40 °C ... 1760 °C
Tc.j Tc-J -200 °C ... 1200 °C
Pt Pt100 -200 °C ... 600 °C
Pt1 Pt100 -200 °C ... 140 °C
ni NI100 -60 °C ... 180 °C
ntc NTC10K -40 °C ... 125 °C
Ptc PTC1K -50 °C ... 150 °C
Pts Pt500 -100 °C ... 600 °C
Pt1k Pt1000 -100 °C ... 600 °C
0.10 0 ... 10 Volt
0.20 0 ... 20 mA
4.20 4 ... 20 mA
0.40 0 ... 40 mVolt
Pot.1 Potentiometer max 6 Kohm (See paragraph 7.10)
Pot.2 Potentiometer max 150 Kohm (See paragraph 7.10)
t.A. 50 mA secondary Current transformer (Only UR484803/04)
3 d.P. Decimal Point
Select type of visualized decimal point
0 Default
0.0 1 Decimal
0.00 2 Decimal
0.000 3 Decimal