User manual
16 - UR4848 - User manual UR4848 - User manual - 17
Digital Input on UR484802
+ 12V
GND
I D
3
2
Digital input using parameter
dGti
.
The use of digital input in this version is possible only
with TC sensors, 0…10 V, 0/4…20 mA and 0…40 mV.
Select internal jumper JP3 as in gure.
Digital Input on UR484803 and UR484804
+ 12V
GND
I D
16
15
Digital input using parameter
dGti
.
Insert JP4 as in gure to select the digital
input.
6 Display and Key Functions
A1
C2
C1
A2
1
3
4
8 9
10
5
6
7
2
6.1 Numeric Indicators (Display)
1
1234
Normally displays the process. During the conguration phase,
it displays the parameter being inserted.
2
1234
Normally displays the setpoint. During the conguration pha-
se, it displays the parameter value being inserted.
6.2 Meaning of Status Lights (Led)
3
C1 C2
ON when the output command is on.
C1 with relay/SSR/mA/Volt command or C1 (open) and C2
(close) for a motorised valve command.
4
A1 A2 A3
ON when the corresponding alarm is on.
5
MAN
ON when the “Manual” function is on.
6
TUN
ON when the controller is running an “Autotune” cycle.
7
REM
ON when the controller communicates via serial port.