User manual

34 - URDR0001 - User manual
Modbus
Address
Description
Read
Only
Reset
value
3019
Word serial relay
Bit 0 = Relay Q1
Bit 1 = Relay Q2
R/W 0
3020 Word SSR serial (0 = O, 1 = On) R/W 0
3021 Word output 0...10 V serial (0…10000) R/W 0
3022 Word output 4...20 mA serial (0…10000) R/W 0
3023
Relay state in case of o-line
(only if controlled by serial)
Bit 0 = Relay Q1
Bit 1 = Relay Q2
R/W 0
3024
Output state SSR / 0…10 V / 4…20 mA in case of
o-line (only if controlled by serial)
(0…10000)
R/W 0
3025
Serial process. Setting parameter 54 it is possible
to make averages on the remote process
R/W 0
4001 Parameter 1*** R/W EEPROM
4002 Parameter 2*** R/W EEPROM
4072 Parameter 72*** R/W EEPROM
***
Parameteränderungen in seriellen Adressen 4001 und 4072 werden erst 10 Sekunden
nach der letzten Änderung im EEPROM gespeichert.