User manual

URDR0001 - User manual - 35
9 Conguration
9.1 Modify Conguration Parameters
For conguration parameters see paragraph 10.
Press Display Do
1
SET
for 3 seconds
Display 1 shows
0.000
with the 1st digit ashing,
while display 2 shows
PASS .
2
or
Changes ashing digit
and move to the next one
using
SET
key.
Enter pa sword:
1234 .
3
SET
to conrm
Display 1 shows the rst
parameter and display 2
shows the value.
4
or
Slide up / down through
parameters.
5
SET
or
Increase or decrease di-
splayed value by pressing
SET
and an arrow key.
Enter new data which will
be saved on releasing the
keys. To change another
parameter return to
point 4.
6
simultaneously
End of conguration
parameter change.
The controller exits from
programming.