User manual

URDR0001 - User manual - 39
9 o . cAL. Oset Calibration
Value added / subtracted to process visualization (usually correc-
ting the value of environment temperature)
-999…+1000 [digit
3
] for linear sensors and potentiometers.
-200.0…+100.0 (degrees.tenths for temperature sensors),
Default 0.0.
10 G. cAL. Gain Calibration
Percentage value that is multiplied for the process value (allows to
calibrated the working point)
-99.9%…+100.0% (Default = 0.0)
11 Act. t. Action type
Regulation type
Heat Heating (N.O.) (Default)
cooL Cooling (N.C.)
H.o.o.S. Lock command above SPV. Example: command output
disabled when reaching setpoint, also with P.I.D. value
dierent from 0
12
c. re. Command Reset
Type of reset for state of command contact (always automatic in
P.I.D. functioning)
a re. Automatic reset (Default)
m re. Manual reset
m re.s. Manual reset stored (keeps relay status also after an even-
tual power failure)